car vibrates running lean or ignition?

K-Series Programmable ECU Calibration updates / downloads
Post Reply
remus
Posts: 32
Joined: Fri Jul 03, 2009 9:20 pm
Location: MONTREAL

car vibrates running lean or ignition?

Post by remus »

I just re installed my engine into my acura tsx we installed supertech full valves, springs and IPS k2 cams. The vibrations I am experiencing is between 1000 rpm and 3500 rpm after that the engine run's smooth and vibration disappears.

It was dyno tuned.

I will post the tune online tomorrow for you guys to have a look at.

On first thought can it be fuel running too lean or the ignition is wrong?

Thanks for your help, i will post up the tune tomorrow as it is on my laptop.
remus
Posts: 32
Joined: Fri Jul 03, 2009 9:20 pm
Location: MONTREAL

Here is the tune

Post by remus »

I did not do any run's yet. Here in Montreal Canada it's still well below zero degrees. If I need to do it just let me know, i will do whatever is necessary in order to try something.

Thank.
Attachments
tsx-04-05 IPS#6online.kal
Tune included
(146.54 KiB) Downloaded 220 times
remus
Posts: 32
Joined: Fri Jul 03, 2009 9:20 pm
Location: MONTREAL

Here are my dyno numbers.

Post by remus »

We used a dynapak theses are the numbers we got:

190 WTQ.
231 WHP.
remus
Posts: 32
Joined: Fri Jul 03, 2009 9:20 pm
Location: MONTREAL

Any luck?

Post by remus »

Tough one guys, anything wrong with the tune?

Thanks :cry:
Post Reply