SManager software requests
Re: SManager software requests
any chance of boost by speed,its easy to convert an abs sensor to read ground speed witch would help control tire spin
Re: SManager software requests
D12 and B6 are being used commonly, as on one car we have exhaust manifold pressure and fuel pressure, some cars use it as a wideband input when they are also using a stock sensor on D14..
I guess a pulldown selection of common sensors would be better than nothing, but having it in the calibration makes more sense.. :)
I guess a pulldown selection of common sensors would be better than nothing, but having it in the calibration makes more sense.. :)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: SManager software requests
Boost by speed isnt as easy to implement as one would think. I suppose if they set it up based on the OEM VSS, then you could find a way to use that VSS input to be triggered by the rear wheel speed sensor..
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: SManager software requests
yes it would be based for the stock vss, we would have to figure out howto make it work with an abs sensor as long as there was a voltage offset it wouldn't be that difficult on the user end
Re: SManager software requests
http://www.adelante-it.de/datasheets/MB-C04.pdf
here a datasheet for a SPP Bluetooth adapter. with something like that, there shouldn't be a big deal to add bluetooth to S300, KPro etc.
best regards Lukas
here a datasheet for a SPP Bluetooth adapter. with something like that, there shouldn't be a big deal to add bluetooth to S300, KPro etc.
best regards Lukas
Re: SManager software requests
Bluetooth seems like a big waste of resources. I know of another system that supports bluetooth, and nobody cares or uses it.
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Re: SManager software requests
just to tune it's wasting recources.locash wrote:Bluetooth seems like a big waste of resources. I know of another system that supports bluetooth, and nobody cares or uses it.
but in combination with datalogging, with apps for smartphones that could show the display, log the data, messure some data (HP/torque calculation, like those streetdyno apps, but on bases of the increase of the engine speed combined with the GPS signal) etc.
in this case this could be pretty interesting.
EDIT: maybe an option of rotating the 3D map would be nice and some calculation options (datalog of revs for calculating the torque, so some kind of streetdyno based on datalogs)
best regards Lukas
Last edited by Luke on Wed May 04, 2011 6:53 am, edited 1 time in total.
Re: SManager V1.5.1 beta
Excellent to see support for this feature request :-DLuke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.
well, and more breakpoints than 3 in the options.
*sorry, wrong thread...*
best regards Lukas
Re: SManager V1.5.1 beta
in my opinion that is a MUST HAVE for detailed work.Johnny_9 wrote:Excellent to see support for this feature request :-DLuke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.
well, and more breakpoints than 3 in the options.
*sorry, wrong thread...*
best regards Lukas
best regards Lukas
Re: SManager software requests
The ground speed sensor ability is a great request
a sensible one also is date stamping or showing the time and date in the Datalogs list.
a sensible one also is date stamping or showing the time and date in the Datalogs list.
www.MSSRACING.com
9.29 | 6.20 | 167
9.29 | 6.20 | 167
Re: SManager V1.5.1 beta
My fingers are crossed, since it is already implemented in K-Pro! :-DLuke wrote:in my opinion that is a MUST HAVE for detailed work.Johnny_9 wrote:Excellent to see support for this feature request :-DLuke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.
well, and more breakpoints than 3 in the options.
*sorry, wrong thread...*
best regards Lukas
best regards Lukas
-
- Posts: 35
- Joined: Wed Oct 08, 2008 12:55 pm
Re: SManager software requests
how about to make the redo/undo buttons greyed out when they cannot go anymore.
Re: SManager software requests
what about to a setting which says how fast the RPM at the limiters recover? meaning: hitting the rev limiter and you can decide if the recovery is 200rpm below the limiter or 20rpm, in example.
same thing of course for LC and FTS
is that possible?
best regards Lukas
same thing of course for LC and FTS
is that possible?
best regards Lukas
Re: SManager software requests
Bluetooth: It's not as easy as you might think because the s300 does not use a serial protocol.
Rev limits: Very early on we found that setting the recovery very close to the cut point was best.
Rev limits: Very early on we found that setting the recovery very close to the cut point was best.
Hondata