SManager software requests

s300 and SManager software questions & answers
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: SManager software requests

Post by Hondata »

What is the sensor input that is being used?
Hondata
turbo-2nr
Posts: 42
Joined: Fri Sep 01, 2006 2:08 am

Re: SManager software requests

Post by turbo-2nr »

any chance of boost by speed,its easy to convert an abs sensor to read ground speed witch would help control tire spin
locash
Posts: 288
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Re: SManager software requests

Post by locash »

D12 and B6 are being used commonly, as on one car we have exhaust manifold pressure and fuel pressure, some cars use it as a wideband input when they are also using a stock sensor on D14..

I guess a pulldown selection of common sensors would be better than nothing, but having it in the calibration makes more sense.. :)
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
locash
Posts: 288
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Re: SManager software requests

Post by locash »

Boost by speed isnt as easy to implement as one would think. I suppose if they set it up based on the OEM VSS, then you could find a way to use that VSS input to be triggered by the rear wheel speed sensor..
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
turbo-2nr
Posts: 42
Joined: Fri Sep 01, 2006 2:08 am

Re: SManager software requests

Post by turbo-2nr »

yes it would be based for the stock vss, we would have to figure out howto make it work with an abs sensor as long as there was a voltage offset it wouldn't be that difficult on the user end
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Re: SManager software requests

Post by Luke »

http://www.adelante-it.de/datasheets/MB-C04.pdf

here a datasheet for a SPP Bluetooth adapter. with something like that, there shouldn't be a big deal to add bluetooth to S300, KPro etc.

best regards Lukas
locash
Posts: 288
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Re: SManager software requests

Post by locash »

Bluetooth seems like a big waste of resources. I know of another system that supports bluetooth, and nobody cares or uses it.
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Re: SManager software requests

Post by Luke »

locash wrote:Bluetooth seems like a big waste of resources. I know of another system that supports bluetooth, and nobody cares or uses it.
just to tune it's wasting recources.

but in combination with datalogging, with apps for smartphones that could show the display, log the data, messure some data (HP/torque calculation, like those streetdyno apps, but on bases of the increase of the engine speed combined with the GPS signal) etc.
in this case this could be pretty interesting.

EDIT: maybe an option of rotating the 3D map would be nice and some calculation options (datalog of revs for calculating the torque, so some kind of streetdyno based on datalogs)

best regards Lukas
Last edited by Luke on Wed May 04, 2011 6:53 am, edited 1 time in total.
Johnny_9
Posts: 312
Joined: Sun Apr 09, 2006 5:12 am

Re: SManager V1.5.1 beta

Post by Johnny_9 »

Luke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.

well, and more breakpoints than 3 in the options.

*sorry, wrong thread...*

best regards Lukas
Excellent to see support for this feature request :-D
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Re: SManager V1.5.1 beta

Post by Luke »

Johnny_9 wrote:
Luke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.

well, and more breakpoints than 3 in the options.

*sorry, wrong thread...*

best regards Lukas
Excellent to see support for this feature request :-D
in my opinion that is a MUST HAVE for detailed work.

best regards Lukas
SPOOLIN
Posts: 143
Joined: Sun Mar 20, 2005 10:47 pm
Location: North Georgia
Contact:

Re: SManager software requests

Post by SPOOLIN »

The ground speed sensor ability is a great request


a sensible one also is date stamping or showing the time and date in the Datalogs list.
www.MSSRACING.com
9.29 | 6.20 | 167
Johnny_9
Posts: 312
Joined: Sun Apr 09, 2006 5:12 am

Re: SManager V1.5.1 beta

Post by Johnny_9 »

Luke wrote:
Johnny_9 wrote:
Luke wrote:a selectable target lambda option would be great, one for the primary map, one for the secondary map.

well, and more breakpoints than 3 in the options.

*sorry, wrong thread...*

best regards Lukas
Excellent to see support for this feature request :-D
in my opinion that is a MUST HAVE for detailed work.

best regards Lukas
My fingers are crossed, since it is already implemented in K-Pro! :-D
jiggacivic
Posts: 35
Joined: Wed Oct 08, 2008 12:55 pm

Re: SManager software requests

Post by jiggacivic »

how about to make the redo/undo buttons greyed out when they cannot go anymore.
Luke
Posts: 249
Joined: Thu Mar 26, 2009 10:24 am
Location: Dorsten/Germany

Re: SManager software requests

Post by Luke »

what about to a setting which says how fast the RPM at the limiters recover? meaning: hitting the rev limiter and you can decide if the recovery is 200rpm below the limiter or 20rpm, in example.
same thing of course for LC and FTS

is that possible?

best regards Lukas
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: SManager software requests

Post by Hondata »

Bluetooth: It's not as easy as you might think because the s300 does not use a serial protocol.

Rev limits: Very early on we found that setting the recovery very close to the cut point was best.
Hondata
Post Reply