FlashPro on FN2 Cruise Control problem

FlashPro questions & answers specific to the FN2 European Civic Type R
sc0rcher
Posts: 37
Joined: Sat May 21, 2011 12:01 am

Indicator trip meter on MAP calibration

Post by sc0rcher »

Hi hondata, are there any fixes for this yet?
http://www.hondata.com/forum/viewtopic. ... 8&start=30

Not the cruise control, but more on the rev indicator n fuel gauge...

User avatar
Hondata
Site Admin
Posts: 9008
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro on FN2 Cruise Control problem

Post by Hondata »

AFM or race calibration?
Hondata

sc0rcher
Posts: 37
Joined: Sat May 21, 2011 12:01 am

Re: FlashPro on FN2 Cruise Control problem

Post by sc0rcher »

Race Calibration aka MAP calibration.
Just wanna know what's the logic that fuel tank level indicator can swing down and up just because of different tuning..
Arent it supposed to indicate with some level gauge sensor inside the fuel tank only?
And the rev meter too... FD2r rev meter can works with MAP calibration. WHy not the Fn2r..

User avatar
Hondata
Site Admin
Posts: 9008
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro on FN2 Cruise Control problem

Post by Hondata »

As I'm sure you know, some aspects of the stock FN2 gauges do not work with race calibrations. If you require those functions, use the AFM calibrations. Not to put too fine a point on it, but it is a 'race calibration'.
Hondata

sc0rcher
Posts: 37
Joined: Sat May 21, 2011 12:01 am

Re: FlashPro on FN2 Cruise Control problem

Post by sc0rcher »

In that case, can the next update includes option to apply ign compensation (iat, ect, etc) applied to MBT table rather than the KIL. (Like the race calibration) The reason I'm using a MAP calibration mainly is that when ign compensation is used on KIL, usually it don't works. Unless i would to put all knock ign limit to zero and knock retards to zero. And i don't know whether will there be any negative effects.

User avatar
Hondata
Site Admin
Posts: 9008
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro on FN2 Cruise Control problem

Post by Hondata »

The knock control logic is the same in the FN2 and race calibrations.
Hondata

sc0rcher
Posts: 37
Joined: Sat May 21, 2011 12:01 am

Re: FlashPro on FN2 Cruise Control problem

Post by sc0rcher »

Logic is the same, but in MAP/Race calibration under ign->Air temp compensation, the ign iat retard can be chosen to applied to ign knock limit or ign adv. This option is not avail in MAF calibration. U got what i mean?

User avatar
Hondata
Site Admin
Posts: 9008
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro on FN2 Cruise Control problem

Post by Hondata »

I'll add that as a feature request.
Hondata

sc0rcher
Posts: 37
Joined: Sat May 21, 2011 12:01 am

Re: FlashPro on FN2 Cruise Control problem

Post by sc0rcher »

Thanks alot...

kawsoi
Posts: 1
Joined: Sat Apr 07, 2012 7:07 am

Re: FlashPro on FN2 Cruise Control problem

Post by kawsoi »

Problem solved! thanks hondata
Last edited by kawsoi on Mon Jun 18, 2012 2:31 am, edited 1 time in total.

User avatar
Hondata
Site Admin
Posts: 9008
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FlashPro on FN2 Cruise Control problem

Post by Hondata »

AFM or race calibration?
Hondata

nunoctr
Posts: 170
Joined: Tue May 16, 2006 12:29 pm

Re: FlashPro on FN2 Cruise Control problem

Post by nunoctr »

kawsoi wrote:I just using Hondata for my FN2 supercharged for the first time and I also face with cruise control problem. After reading this topic, It's already twice year of this problem. Do you already have solution yet? I need responsibility asap!!!.
this problem was solved many months ago by hondata.
You are using a map calibartion, so ask your tuner to put the correct gear ratios on calibration and you are good to go.

Post Reply