I need a tuned map for a stock Euro EP3 K20A2. Help please
I need a tuned map for a stock Euro EP3 K20A2. Help please
Hi,
I've just bought a KPRO and I don't think it comes with a tuned map for a stock Euro EP3 K20A2.
I've searched on here and only see KAL files for EP3's with additional mods.
Would the base calibration ( k20a2-civictyper-tuned.kal ) suit my set up? I notice the VTEC is lowered but the rev limiter is still at 8100.
Can anyone help?
Thanks.
I've just bought a KPRO and I don't think it comes with a tuned map for a stock Euro EP3 K20A2.
I've searched on here and only see KAL files for EP3's with additional mods.
Would the base calibration ( k20a2-civictyper-tuned.kal ) suit my set up? I notice the VTEC is lowered but the rev limiter is still at 8100.
Can anyone help?
Thanks.
-
- Posts: 10
- Joined: Thu Nov 10, 2011 3:44 pm
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
my tuned k20 makes 215whp on the hub dyno, only a header and induction kit. can upload the kal for that if you would like
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Hi,
Sure that be good thanks. Whats the VTEC kick in at?
Sure that be good thanks. Whats the VTEC kick in at?
-
- Posts: 10
- Joined: Thu Nov 10, 2011 3:44 pm
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
lower boundary is 4600 and upper is 6500, it has been tuned by romain levesque at eurospec2000. very reputable tuner.
-
- Posts: 10
- Joined: Thu Nov 10, 2011 3:44 pm
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
see attachement, running open loop as my o2 sensors arent wired in,
- Attachments
-
- Normal standard map.kal
- (141.67 KiB) Downloaded 785 times
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Thanks,
One quick question, obviously not going to be 100% but would a race header and intake make this map completely unsuitable for a standard EP3?
One quick question, obviously not going to be 100% but would a race header and intake make this map completely unsuitable for a standard EP3?
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
my car is wired there, i have to make it closed loop?seanyreeves wrote:see attachement, running open loop as my o2 sensors arent wired in,
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
215 whp, i think u mean bhp, not even a s2000 makes 215 whpseanyreeves wrote:my tuned k20 makes 215whp on the hub dyno, only a header and induction kit. can upload the kal for that if you would like
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Why is immobilizer disabled, purge system disabled and ELD disabled?
Did u do a swap?
Then this map is not suitable for other users.
Did u do a swap?
Then this map is not suitable for other users.
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Since there is an overal fuel trim of 20%, running this map on a normal setup without header, will result in too rich mixture, fucking your engine on long term, so adapt this to 0.
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
can you modify this calibration and upload it so i can load it to the ecu?Nazul wrote:Since there is an overal fuel trim of 20%, running this map on a normal setup without header, will result in too rich mixture, fucking your engine on long term, so adapt this to 0.
im not an expert in this, thats why im asking and i want to thank you for your time and help
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Yes i can do this tomorrow sorry no k manager installed on windows 8 here at home only at work.
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Here u go this calibration is adapted for closed loop all sensors on and no fuel trim
- Attachments
-
- Normal standard map.kal
- (145.09 KiB) Downloaded 570 times
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
thank you very much!!!
where are you from?
if you come to greece i owe you a drink
where are you from?
if you come to greece i owe you a drink
Re: I need a tuned map for a stock Euro EP3 K20A2. Help plea
Belgium, a little bit too far to just come over ;-)