Hondata

Hondata User Forum
It is currently Fri May 24, 2013 7:44 am

View unanswered posts | View active topics


Board index » s100/s200/s300 » s300 / SManager

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
Listerofsmeg
 Post subject: crude bbg
PostPosted: Fri Mar 16, 2012 3:40 pm 
Offline

Joined: Fri Nov 18, 2011 8:14 am
Posts: 12
Hi, my tuner and i were having a few troubles with the boost control on my s300, however we have managed to control high boost but we dont seem to have good control of anything inbetween.

My question is, can BBG be set up so that 1st and 2nd runs on w/g pressure i.e. 0% and 3/4/5th gear run at the predefined max that we mapped to? i was quite sure that the lowest duty cycle you could enter was 10%, is that still the case? or would my proposal work?

_________________
Trying to build the worlds first 200mph+ Delsol! Nearly there......
692hp 500tq @ 2.4bar BW S372R B18
Top
 Profile  
 
Spunkster
 Post subject: Re: crude bbg
PostPosted: Fri Mar 16, 2012 3:42 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11094
Location: Hondata
Did you install a diode with the solenoid?
Top
 Profile  
 
Listerofsmeg
 Post subject: Re: crude bbg
PostPosted: Fri Mar 16, 2012 3:45 pm 
Offline

Joined: Fri Nov 18, 2011 8:14 am
Posts: 12
yes the diode is installed.

_________________
Trying to build the worlds first 200mph+ Delsol! Nearly there......
692hp 500tq @ 2.4bar BW S372R B18
Top
 Profile  
 
Listerofsmeg
 Post subject: Re: crude bbg
PostPosted: Fri Mar 16, 2012 3:46 pm 
Offline

Joined: Fri Nov 18, 2011 8:14 am
Posts: 12
we suspect that the PWM components in the ecu arent quite right, but thats for another day.

For now i just need to make do so i can at least have a chance of getting soem traction in 1st and 2nd gears...

can it be done this way?

_________________
Trying to build the worlds first 200mph+ Delsol! Nearly there......
692hp 500tq @ 2.4bar BW S372R B18
Top
 Profile  
 
Spunkster
 Post subject: Re: crude bbg
PostPosted: Fri Mar 16, 2012 4:07 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11094
Location: Hondata
remove the diode you installed with the solenoid, that should resolve the issue.
Top
 Profile  
 
Listerofsmeg
 Post subject: Re: crude bbg
PostPosted: Sat Mar 17, 2012 2:52 am 
Offline

Joined: Fri Nov 18, 2011 8:14 am
Posts: 12
ok thats interesting, incase it makes any difference the solenoid i am using is the one from an apexi AVCR, not a MAC solenoid. Does that change anything?

_________________
Trying to build the worlds first 200mph+ Delsol! Nearly there......
692hp 500tq @ 2.4bar BW S372R B18
Top
 Profile  
 
Listerofsmeg
 Post subject: Re: crude bbg
PostPosted: Sat Mar 17, 2012 3:48 pm 
Offline

Joined: Fri Nov 18, 2011 8:14 am
Posts: 12
Any further input on this? Or do you think the diode removal will just sort it?

_________________
Trying to build the worlds first 200mph+ Delsol! Nearly there......
692hp 500tq @ 2.4bar BW S372R B18
Top
 Profile  
 
Spunkster
 Post subject: Re: crude bbg
PostPosted: Mon Mar 19, 2012 1:19 pm 
Offline
Site Admin
User avatar

Joined: Fri Sep 20, 2002 5:06 pm
Posts: 11094
Location: Hondata
Try it removing the diode and see if it helps.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » s100/s200/s300 » s300 / SManager

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group