Hey guys, First time posting on here but I have been working the s300s for a long time now. Im having an issue I have not ran into before. This is the third v2 I have installed and everything has gone great up untill this problem. While doing a startup calibration on a car I got a window that I believe said that the Hardware needed updated, and not to turn the car off. I hit ok, and in twenty minutes or so absolutely nothing happened on the loading bar. After a few more minutes of nothing happening I eventually keyed it off. Now I have no lights on the s300, and I can connect, but cannot upload or download and datalogging does not function.
I know he socketing or ecu is not an issue as I put the module in my personal ecu and had the same problem, mine when back in and worked great.
I have the most recent software version as well, and have checked for any obvious damage to the unit itself.
Any help would be great, Im thinking I need to just send it in and get another on order.
Yup - Had the same issue - "Firmware" update took 30 minutes; after which it asked for another firmware update; very disappointing and frustrating. Be good if there is some response from Hondata.