boost solenoid in 04-05 civic d17 kpro

[JoSoTurbo]

I have kpro for d17. The problem Im having is how do I get the boost solenoid to hold 7 boost in all 5 gears. It keeps boosting all the way to 10 psi no matter what I try. I have boost control enabled and I have it set at 100% normally closed and I have it set at to activate at 1 psi. The basemap I am using is the supplied basemap for 310cc injectors for the 04-05 honda civic. I currently am running boost cut at 8lbs to protect the car. What am I doing wrong?

[locash]

If you disable the boost control, what does the car do then? If it still overboosts, you will need to change the wastegate spring..

[JoSoTurbo]

If I disable boost control and unhook the vacuum line running from the top of the wastegate it holds at 5lbs no prob.

[Spunkster]

Try other settings besides 100%...like 5% intervals starting at 15% and going up from there

[JoSoTurbo]

Still no luck sir. I noticed you all have boost solenoid frequency available for flashpro users. Could you all update Kmanager with this feature for us Kpro users. Maybe that would help some of us.

[Spunkster]

What pin on the ECU do have it connected to?

[tiger]

Hondata,

For KPro, what is the fixed frequency that the boost solenoids operate at? Since we can't change it.

[Spunkster]

It is 25hz

[tiger]

It is 25hz

Thank you very much. Are there any plans to have this be adjustable like S300 and FlashPro or does the ECU not support that?

[Spunkster]

The ECU does not support a variable frequency.

[tiger]

The ECU does not support a variable frequency.

Alright, thanks for all the responses.

It's odd it seems that the RSX ECU lacks a lot of the capabilities of the other Honda ECUs (Si, TSX, etc.)