K20A2 - knock issues
K20A2 - knock issues
I have a Lotus Elise with a K20A2 conversion and have been experiencing knock. I have had the car dyno-tuned at a local Hondata distributor. Since then I'm still getting knock - initially I thought it was only in hot weather but recently I logged some knock in cooler weather.
Comparing the tune (ignition advance tables) to some of the base Hondata tunes mine looks pretty aggressive although I'm certainly not an expert in this stuff.
Attached are the log with an example of the knock as well as the tune itself.
Would appreciate any feedback.
thanks
Engine itself is stock although is running a custom exhaust and a green cotton enclosed pod style filter.
Comparing the tune (ignition advance tables) to some of the base Hondata tunes mine looks pretty aggressive although I'm certainly not an expert in this stuff.
Attached are the log with an example of the knock as well as the tune itself.
Would appreciate any feedback.
thanks
Engine itself is stock although is running a custom exhaust and a green cotton enclosed pod style filter.
- Attachments
-
- 12.kdl
- (1.34 MiB) Downloaded 274 times
-
- Tuned 17 Dec 13.kal
- (151.52 KiB) Downloaded 273 times
Re: K20A2 - knock issues
4 minute datalog...90% of the knocks are in the first 5 seconds. LMAO
Weird tune and youre right, the timing is aggressive, but not excessively so.
Get a good 3rd gear pull and post it. This one is in 4th and cuts off. It does appear to be a top end timing issue causing the issue.
The "stock-tuned" is the best comparison for your car.
Weird tune and youre right, the timing is aggressive, but not excessively so.
Get a good 3rd gear pull and post it. This one is in 4th and cuts off. It does appear to be a top end timing issue causing the issue.
The "stock-tuned" is the best comparison for your car.
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
I have the datalog set to start automatically on WOT which is why the log isn't all that complete (the Lotus has a lack of spare signals to use as a switch so I need to work something out there).
I will try and do a 3rd gear run today and post up the results.
Thanks for your help.
I will try and do a 3rd gear run today and post up the results.
Thanks for your help.
Re: K20A2 - knock issues
I did some 3rd gear runs today in the attached file. Wasn't getting much knock but how does it look otherwise?
Thanks
Thanks
- Attachments
-
- run 2.kdl
- (1.14 MiB) Downloaded 220 times
Re: K20A2 - knock issues
Theres a few spots that are leaner than I would like. Also some of the timing changes from low cam to high cam are a bit abrupt, but overall its not bad.
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
Thanks for taking a look, much appreciated.
In terms of the fueling, which area's should I be looking to fix?
In terms of the fueling, which area's should I be looking to fix?
Re: K20A2 - knock issues
Well you did the log in closed loop, so the only useful data is WOT.
I added a little fuel for safety just before VTEC and just after. I didnt mess with the timing. Get me another log like this.
I added a little fuel for safety just before VTEC and just after. I didnt mess with the timing. Get me another log like this.
- Attachments
-
- Tuned 17 Dec 13(mod).kal
- (151.08 KiB) Downloaded 222 times
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
Great, thanks alot for this. I probably won't get a chance to do another run until the weekend though (I have a track day on Sunday which would be ideal).
BTW, I couldn't work out how to do the datalog in open loop.
BTW, I couldn't work out how to do the datalog in open loop.
Re: K20A2 - knock issues
Open Parameters, Click Closed Loop, and uncheck the box. :) I wouldnt drive it around like this unless you are datalogging cruise fuel values.
I would recommend running this map at your track day though. It might not be as fast (though I doubt youd notice a difference) but there is a bit more fuel there for safety.
I would recommend running this map at your track day though. It might not be as fast (though I doubt youd notice a difference) but there is a bit more fuel there for safety.
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
Ok, attached is a datalog from the trackday today. Plenty of knock to analyse unfortunately :( After looking at this I called it quits for the day (it was also wet so very little to be gained from continuing).
Cal also attached for reference.
Very appreciative of any thoughts as to what's wrong with my tune. Ignition advance or something else?
Thanks
Cal also attached for reference.
Very appreciative of any thoughts as to what's wrong with my tune. Ignition advance or something else?
Thanks
- Attachments
-
- Tuned 1 Jun 14.kal
- (151.06 KiB) Downloaded 226 times
-
- eastern creekrun 2.kdl
- (3.9 MiB) Downloaded 226 times
Re: K20A2 - knock issues
Wow.
Yeah it definitely needs some work.
Yeah it definitely needs some work.
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
I'm running much much more timing than that with no issues.
are you sure that this is no ghost knock due to some other issues including the sensor itself?
are you sure that this is no ghost knock due to some other issues including the sensor itself?
Re: K20A2 - knock issues
Can I hear more about this?darton wrote:I'm running much much more timing than that with no issues.
are you sure that this is no ghost knock due to some other issues including the sensor itself?
Of all the cars Ive done, most of them preferred between 26-30* timing at WOT. Occasionally up to 32* but never any more than that. How much is "much more?"
07 Civic Si Sedan (sold)
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
17 Civic Si Sedan (daily)
02 RSX Type S (project)
Hit me up for free Hondata Help!
Re: K20A2 - knock issues
Hello keto ..... seems that I was looking at a wrong map from another setup.
I also run max 33° figures but then retard a bit for safe purposes and no further gains.
I also run max 33° figures but then retard a bit for safe purposes and no further gains.