KPro / KManager requests

K-Series Programmable ECU installation questions / support issues
User avatar
Hondata
Site Admin
Posts: 8476
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KPro / KManager requests

Post by Hondata » Tue Aug 25, 2015 8:51 am

Problem is that if you have latest version it cannot be downgraded.
Exactly. No matter how many times we tell people not to downgrade software versions they still do. We're the creators of the hardware, firmware and software; you'd think our instructions would carry some weight.
Hondata

Knox
Posts: 120
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Wed Sep 16, 2015 11:34 pm

Adjustable cold start rev control like s300.

User avatar
sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: KPro / KManager requests

Post by sass » Fri Sep 18, 2015 11:01 am

do you plan to make air temp compensation for k-pro boost
Boost Control Parameters
The boost pressure for a given duty cycle will vary with ambient air temperature, with increased pressure with cooler air and less pressure with hotter air. This table allows you to adjust the duty cycle based on intake air temperature. The compensation is applied to both a fixed duty cycle and duty cycle by rpm & gear.
k24a2 stock

18C

Image

44C

Image
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

akep
Posts: 12
Joined: Sat Oct 01, 2011 5:11 pm

Re: KPro / KManager requests

Post by akep » Sun Sep 27, 2015 11:55 pm

i've been wanting to have Ctrl+S for Save As... added to Kmanager for a long long time. I like to save my changes often so I can go back easily or flip flop around when troubleshooting. Also the less I have to use the trackpad to point and click for things the better. or even better, if there could be a shortcut for saving but it adds a revision number automatically to the currently opened .kal. for instance if i had "Mike K20.kal" I could hit a keyboard shortcut like Ctrl+Shift+S and it would just save "Mike K20 001.kal" then "Mike K20 002.kal" or whatever fashion/wildcard could be manually inputted besides "001, 002" like fewer or more numbers or the date.

MPG estimator while live tuning is enabled?

TJAPZ0RRO
Posts: 14
Joined: Fri May 30, 2014 8:59 am

Re: KPro / KManager requests

Post by TJAPZ0RRO » Tue Sep 29, 2015 1:13 am

Ignition retard activated by clutch switch input : )

Edit: You don't want to retard with every shift, only for full throttle shift ..

So, ignition retard after clutch switch input AND tps 90%+

-TJAP

User avatar
sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: KPro / KManager requests

Post by sass » Thu Oct 01, 2015 5:38 am

hondata
could you tune tracktion(TC) by gears: i'd like it to activate on 1st and 2nd gears, but not on 3, 4, 5th.

kind of idea
Image
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

User avatar
sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: KPro / KManager requests

Post by sass » Thu Oct 01, 2015 9:52 pm

second variant

Image
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

User avatar
Hondata
Site Admin
Posts: 8476
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KPro / KManager requests

Post by Hondata » Fri Oct 02, 2015 2:12 pm

Max vehicle speed would be easier, but would just maximum gear be better still?
Hondata

Knox
Posts: 120
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Fri Oct 02, 2015 8:14 pm

Hondata wrote:Max vehicle speed would be easier, but would just maximum gear be better still?
Is it possible to add these features?
Rev limit by gear and adjustable idle rpm by ect like s300.

User avatar
sass
Posts: 104
Joined: Mon Oct 06, 2008 5:07 am
Location: Evropa-Estonia-Tallinn

Re: KPro / KManager requests

Post by sass » Sat Oct 03, 2015 11:13 am

Hondata wrote:Max vehicle speed would be easier, but would just maximum gear be better still?
Yes
Any variant

Gear-speed

Image
Cr-v RD8+K24A2turbo+Kpro V4 prb+NPR3/6Speed+ТС+ HFS4 v3.2.
DynoWheel = 472kW / 589 N.m
HRX One Mile Challenge = Max Speed 282km
Known as Sniper

Honda
Posts: 28
Joined: Sat May 17, 2014 9:59 am

Re: KPro / KManager requests

Post by Honda » Thu Oct 08, 2015 11:53 am

Knox wrote:ignition cut, if possible.

thanks.
+1

NtegraDryvr
Posts: 13
Joined: Thu Aug 21, 2008 6:36 pm

Re: KPro / KManager requests

Post by NtegraDryvr » Tue Oct 20, 2015 11:22 am

2 requests
1.
I am desperately needing a delay function added to the Nitrous fuel & ign tables that I am using for water methanol injection.

I spray 45GPH (2835cc/min) worth of 80% methanol to water in 2 stages (20gph then 25gph). What is happening is that the computer removes fuel before the WM makes it to the motor and the car has a huge lean spike and bogs for a second then takes off like a huge shot of nitrous. This is due to 2000 units of fuel being removed from the injectors when the nitrous controls are activated but before the methanol makes it to the motor.

2.
Also it would be very helpful to add the option for activation based on gear since we don't have closed loop boost control. I would rather closed loop boost control be added, but this would solve another issue for me as well if this could be added. One day my boost levels in X gear are much higher or much lower and this effects activation of my 2nd stage.

If these issues can be fixed soon I will be purchasing a traction control unit as well, if not I'll be going AEM infinity to get these features.

Thanks!

Knox
Posts: 120
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Thu Oct 22, 2015 5:16 am

cold start idle rpm ect compensation, rev limit by gear, ignition cut.

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: KPro / KManager requests

Post by D-Rob » Thu Dec 17, 2015 6:25 am

I pop in here once a year and request an IAT vs PWM duty compensation table.

Thanks!

contectr
Posts: 144
Joined: Mon Feb 13, 2006 4:03 am

Re: KPro / KManager requests

Post by contectr » Sat Dec 19, 2015 3:53 pm

Closed loop boost control!! :-)
Honda Ep3 stock k20a2 jrsc

Post Reply