No start issue

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No start issue

Post by Spunkster »

Post a picture of the battery power and ground connections.
blindpenguin
Posts: 14
Joined: Mon Jul 14, 2014 3:59 am

Re: No start issue

Post by blindpenguin »

Battery ground and power
Attachments
1460746352016-410995293.jpg
1460746352016-410995293.jpg (2.63 MiB) Viewed 4130 times
1460745621571-1600374006.jpg
1460745621571-1600374006.jpg (2.17 MiB) Viewed 4131 times
Last edited by blindpenguin on Fri Apr 15, 2016 11:53 am, edited 1 time in total.
blindpenguin
Posts: 14
Joined: Mon Jul 14, 2014 3:59 am

Re: No start issue

Post by blindpenguin »

We got it started again just now.

Same process. We cleared the chassis codes that were in there. I reflashed to stock, and then to my map and it started.

Problem is, it's done this twice now....it will run like this for a day and then sit for long enough and not start. Only thing that works is clearing those codes and reflashing.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No start issue

Post by Spunkster »

If you return it to stock and it continues to do this, you should unlock the FlashPro and take it to a Honda dealer to have them trouble shoot.
blindpenguin
Posts: 14
Joined: Mon Jul 14, 2014 3:59 am

Re: No start issue

Post by blindpenguin »

Well, it wont start on stock. With the supercharger system and everything installed, running stock is not an option. I think something may have happened to the VSA module. I'm going to check the fuse and i'm hoping it's that.

Can you confirm that the VSA codes would cause the no start issue?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: No start issue

Post by Spunkster »

VSA should have nothing to do with this.
9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Re: No start issue

Post by 9k_Dre »

Sorry to bring up an old thread. But did you ever find out what the issue was? My car has a turbo and I am have similar issues.
9k_Dre
Posts: 14
Joined: Fri Jul 13, 2018 1:07 pm

Re: No start issue

Post by 9k_Dre »

same issue with my car now, I would have to reflash the ECU to a stock map then upload the turbo basemap back on in order for the car to start.

2007 FA5
turbo kit
DW 1000cc
Hondata 4bar map
Post Reply