09 TSX fan control not working

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
fabiangt79
Posts: 48
Joined: Sat Nov 01, 2008 10:17 am

09 TSX fan control not working

Post by fabiangt79 »

I used a base map from hondata to flash into this 2009 tsx AT.
The fan control does not work according to what i set, its works only from 94 degree and stops at 87 degree.

i set it to 90 degree and even disable the second ECT sensor but still does not work.

The other issue is the throttle map as shown is a base given by Hondata, after flashing in the car was slow like a tortise.

I checked the datalog and saw that when request for 15% throttle pedal the throttle plate only opens 4 or 5 %.

What could be wrong, most of this base maps work well, is there a problem to the throttle map?
Attachments
2009 TSX.fpcal
(20.75 KiB) Downloaded 170 times
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 09 TSX fan control not working

Post by Spunkster »

The temp at the 2 sensors is not the same. The temp the fan uses may not be the one you are seeing the reading from.

Automatic calibrations have no adjustment to the throttle plate actuation.
UTAH TSX
Posts: 23
Joined: Tue Jul 23, 2013 9:18 pm
Location: UTAH

Re: 09 TSX fan control not working

Post by UTAH TSX »

I have been fighting this also my ECT1 & ect2 are always the same and my fans wont turn on until engine is 215-220 no matter what I set them to turn on at ? 2009 auto TSX
User avatar
Spunkster
Site Admin
Posts: 22742
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 09 TSX fan control not working

Post by Spunkster »

Post a datalog and the associated calibration showing the issue.
Post Reply