IDLE papameter issue it did not take effect.
IDLE papameter issue it did not take effect.
I have programmed this calibration to my ECU with one issue.
The actual idle speed is not what I set in cal. I set it to 700 and it runs on 800 actually, checked by hondata mobile app.
The actual idle speed is not what I set in cal. I set it to 700 and it runs on 800 actually, checked by hondata mobile app.
Re: IDLE papameter issue it did not take effect.
Without the calibration and datalog it is hard to say what it might be.
Re: IDLE papameter issue it did not take effect.
Please refer:Spunkster wrote:Without the calibration and datalog it is hard to say what it might be.
Re: IDLE papameter issue it did not take effect.
There is no datalog posted.
Re: IDLE papameter issue it did not take effect.
Sorry for that,here you go.Spunkster wrote:There is no datalog posted.
Re: IDLE papameter issue it did not take effect.
What year vehicle is this and what exactly has been done to it?
Re: IDLE papameter issue it did not take effect.
05tsx stock plus 07 flashpro.Spunkster wrote:What year vehicle is this and what exactly has been done to it?
Re: IDLE papameter issue it did not take effect.
I only see it idling for about 20 seconds in these datalogs.
The stock equivalent calibration has an idle set to nearly 800. It probably is not a good idea to try to idle it lower than stock as this can cause low oil pressure and also a lot of additional vibration.
The stock equivalent calibration has an idle set to nearly 800. It probably is not a good idea to try to idle it lower than stock as this can cause low oil pressure and also a lot of additional vibration.
Re: IDLE papameter issue it did not take effect.
Could you check why this setting dosenot work, I need this function to be fixed.my car is automation tranny.
Re: IDLE papameter issue it did not take effect.
Have you tried the idle learn procedure?
With the engine completely warm and everything turned off (ac, audio, lights, etc.), let the car idle for 5 minutes without touching the throttle. IF the fans come on, do not include the time they are on in the 5 minutes.
With the engine completely warm and everything turned off (ac, audio, lights, etc.), let the car idle for 5 minutes without touching the throttle. IF the fans come on, do not include the time they are on in the 5 minutes.
Re: IDLE papameter issue it did not take effect.
Please refer the 10 minute idle datalog.
- Attachments
-
- Start_VTEC4500_8_throttle_0.fpcal
- (15.28 KiB) Downloaded 185 times
-
- idle 00.fpdl
- (1.21 MiB) Downloaded 176 times
Re: IDLE papameter issue it did not take effect.
I followed it please check the datalog in above post.Spunkster wrote: ↑Thu May 18, 2017 3:03 pm Have you tried the idle learn procedure?
With the engine completely warm and everything turned off (ac, audio, lights, etc.), let the car idle for 5 minutes without touching the throttle. IF the fans come on, do not include the time they are on in the 5 minutes.
Re: IDLE papameter issue it did not take effect.
Is there any update?Spunkster wrote: ↑Thu May 18, 2017 3:03 pm Have you tried the idle learn procedure?
With the engine completely warm and everything turned off (ac, audio, lights, etc.), let the car idle for 5 minutes without touching the throttle. IF the fans come on, do not include the time they are on in the 5 minutes.