Hi, Im building a race harness for a track car. It has a F20c engine and a PRB ecu with kpro v4 build for the s2000.
The owner has lost the harness for the new Camsensor and Cranksensor. What pinout should I wire them to?
We have a RSX primary wideband lambda, what do I need to do to make it work?
(In the manual you say that to use a narrowband and change settings to use secondary lambda in kpro).
Thanks!
/Malkolm
S2000 kpro wiring for race car
Re: S2000 kpro wiring for race car
Can you give us the KPro serial number and the ECU serial number?
You can't use the RSX wideband. If you want a wideband then use an aftermarket wideband and feed the output in the ECU or the KPro.
You can't use the RSX wideband. If you want a wideband then use an aftermarket wideband and feed the output in the ECU or the KPro.
Hondata
-
- Posts: 48
- Joined: Thu Aug 09, 2007 6:06 am
Re: S2000 kpro wiring for race car
2054-101582
43342
43342
-
- Posts: 48
- Joined: Thu Aug 09, 2007 6:06 am
Re: S2000 kpro wiring for race car
Please respond asap, car is supposed to go on the dyno tomorrow. Ive already wired in a innovate gauge and lqmbda to the kpro.
Now its just the cam & crank sensors I need to wire correctly.
Now its just the cam & crank sensors I need to wire correctly.
-
- Posts: 48
- Joined: Thu Aug 09, 2007 6:06 am
Re: S2000 kpro wiring for race car
Second S2000 with Kpro here in Sweden? Nice :)