Hi, I didn't find where are the cam control tables, and I want to know why sometime the Pedal is on the floor but throttle is closing during pull?
thanks
Cam tables and Throttle control information
-
- Posts: 248
- Joined: Wed May 17, 2006 9:49 am
-
- Posts: 248
- Joined: Wed May 17, 2006 9:49 am
Re: Cam tables and Throttle control information
Here are the cal and datalog
- Attachments
-
- run11.fpcal
- (13.31 KiB) Downloaded 131 times
-
- run11.fpdl
- (43.39 KiB) Downloaded 130 times
Re: Cam tables and Throttle control information
Is this a CVT?
Re: Cam tables and Throttle control information
It is normal for the throttle plate to not match the throttle pedal. As long as the boost pressure matches the boost command the ECU may not always open the throttle fully.
Hondata
-
- Posts: 248
- Joined: Wed May 17, 2006 9:49 am
Re: Cam tables and Throttle control information
is a full Manual transmission.
Where are the cams tables?
Where are the cams tables?
Re: Cam tables and Throttle control information
It does not have cam tables like previous ECUs.
Hondata