KPro / KManager requests

K-Series Programmable ECU installation questions / support issues
fonzeka
Posts: 79
Joined: Thu Feb 11, 2016 4:15 am
Location: Sweden

Re: KPro / KManager requests

Post by fonzeka » Mon Oct 31, 2016 4:54 am

+1 on the S2000 coolant temp gauge.

User avatar
Hondata
Site Admin
Posts: 8725
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KPro / KManager requests

Post by Hondata » Sun Nov 20, 2016 6:33 pm

Removed the pirate link. The S2000 coolant output is driven by the adapter, not the ECU. It's output cannot be changed.
Hondata

fonzeka
Posts: 79
Joined: Thu Feb 11, 2016 4:15 am
Location: Sweden

Re: KPro / KManager requests

Post by fonzeka » Mon Nov 21, 2016 4:57 am

Thanks for the explanation and sorry if the picture was inappropriate.

SilverRD1
Posts: 7
Joined: Wed Jan 09, 2013 6:51 pm

Re: KPro / KManager requests

Post by SilverRD1 » Tue Dec 06, 2016 12:36 pm

can we get CAN output support for native honda clusters such as the TSX cluster?

I'd be happy to mail you mine for developement

Econobox4
Posts: 4
Joined: Wed Jul 24, 2013 9:40 pm

Re: KPro / KManager requests

Post by Econobox4 » Thu Dec 15, 2016 12:23 pm

SilverRD1 wrote:can we get CAN output support for native honda clusters such as the TSX cluster?

I'd be happy to mail you mine for developement

^This. The Flashpro for the TSX is great for those who aren't getting into more engine work, boost, or wanting to elimate DBW (For off road use only of course).

Jvaro001
Posts: 1
Joined: Tue May 16, 2017 4:12 pm

Re: KPro / KManager requests

Post by Jvaro001 » Tue May 16, 2017 4:15 pm

Hello,

I am trying to get this wideband supported in order to run closed loop/open loop properly

https://www.bmotorsports.com/shop/produ ... ts_id/2334

NTK AFRM - Air Fuel Ratio Monitor Kit - Wideband O2 - PN 96604 - w/ NTK Sensor

Thank you very much.

M111
Posts: 5
Joined: Wed Apr 21, 2010 12:20 pm

Re: KPro / KManager requests

Post by M111 » Sun Jul 23, 2017 3:03 am

Hi,

Would it be possible to add analogue outputs of the VSS & ECT?

This would be very useful for engine swaps if these two could be implemented, the VSS would need to be configurable for output wave form & speed to suit the wheel size. The ECT would need to simulate the variable resistance of normal temperature sender with a user configurable voltage slope.

Eddie Z
Posts: 1
Joined: Thu Jul 27, 2017 1:00 am

Re: KPro / KManager requests

Post by Eddie Z » Thu Jul 27, 2017 1:52 am

Hi,

it would be great to be able to disable Fuel tank pressure sensor (P0452) without disabling OBD2. I'm running a european EP3 with PRC ECU and my car doesn't have a FTP sensor so I need to reset the fault code every now and then.

AREA876
Posts: 400
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: KPro / KManager requests

Post by AREA876 » Tue Dec 05, 2017 4:52 am

Would like to be able to tell the ECU what static fuel pressure i'm running and/or the ECU can adjust the values base on a fuel pressure sensor

Knox
Posts: 122
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Mon Jan 01, 2018 2:15 pm

Hello hondata or spunkster,

First of all I wish happy new near to all. I updated my kmanager on my laptop to 4.3.4. I tuned my customer’s car and my own car both cars rev limiter sound changed, now it cuts much slower it is more likly to oem honda ecu’s cut. Did you changed anyting on latest version?

Thanks

User avatar
Hondata
Site Admin
Posts: 8725
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KPro / KManager requests

Post by Hondata » Mon Jan 01, 2018 5:24 pm

The overall rev limiter or the launch limiter? What version did you upgrade from?
Hondata

Knox
Posts: 122
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Mon Jan 01, 2018 10:53 pm

Hondata wrote:
Mon Jan 01, 2018 5:24 pm
The overall rev limiter or the launch limiter? What version did you upgrade from?
Overall rev limiter changed. I use 4.3.3 before this change.

Knox
Posts: 122
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Fri Jan 26, 2018 6:10 am

Hondata wrote:
Mon Jan 01, 2018 5:24 pm
The overall rev limiter or the launch limiter? What version did you upgrade from?
Overall rev limiter changed. I use 4.3.3 before this change.

Is there any update about it ? Or can it be because of you add
“Added rev limiter sensor to datalogging.” feature new version of kmanager?

User avatar
Hondata
Site Admin
Posts: 8725
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: KPro / KManager requests

Post by Hondata » Fri Jan 26, 2018 12:23 pm

Yes, it was from the change for the datalogging of the rev limiter. Let us test this out and see how much difference there is.
Hondata

Knox
Posts: 122
Joined: Mon Jun 06, 2011 6:01 pm

Re: KPro / KManager requests

Post by Knox » Wed Feb 07, 2018 6:19 am

Hondata wrote:
Fri Jan 26, 2018 12:23 pm
Yes, it was from the change for the datalogging of the rev limiter. Let us test this out and see how much difference there is.
Can I install back v.4.3.3 since they are using the same firmware I thought that it may work when downgrade the kmanager version.

And also I couldn't find v4.3.3 on forum can you upload it here or write a link please.

Post Reply