Stock LSV/B16a2 Head/B18b Block

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
DailyDC2
Posts: 2
Joined: Mon Feb 19, 2018 7:10 am

Stock LSV/B16a2 Head/B18b Block

Post by DailyDC2 »

Hey everyone, I'm running a stock LSV setup with a B16 head and B18 block. I'm looking to see if anyone has a calibration that I can at least use to get the car running. I looked through the calibrations that are on S300 manager but I'm not quite sure as to which one to run with my stock setup. Any help on this would be awesome and greatly appreciated!
darksands
Posts: 8
Joined: Mon Feb 18, 2013 5:39 pm

Re: Stock LSV/B16a2 Head/B18b Block

Post by darksands »

Look for B20VTEC maps if you can't find one for a B18V. I remember seeing one around here. I attached one that I found a while ago . Not mine so use at your own risk.
Attachments
b20vtec stock.skl
(35.42 KiB) Downloaded 437 times
DailyDC2
Posts: 2
Joined: Mon Feb 19, 2018 7:10 am

Re: Stock LSV/B16a2 Head/B18b Block

Post by DailyDC2 »

Thank you for the reply! I was wondering if a B20v tune would be compatible!
nateoorade
Posts: 1
Joined: Fri Jan 04, 2019 4:29 pm

Re: Stock LSV/B16a2 Head/B18b Block

Post by nateoorade »

Hey were you able to get this to work?
Post Reply