PRB oem lambda doesnt read richer then 11.4 anymore!

K-Series Programmable ECU installation questions / support issues
Post Reply
Malkolm666
Posts: 48
Joined: Thu Aug 09, 2007 6:06 am

PRB oem lambda doesnt read richer then 11.4 anymore!

Post by Malkolm666 »

Hi,
PRB ecu, k24a3, turbo Garrett GT2860rs with 10psi, PRB stock oem wideband lambda.

2 questions:
*I noticed that on dyno it wont show richer then 11.4, Even when the real value is done to 9´s. it only show a straight line 11.4-11.5. Tried 2 used lambdas in good condiotion and then bought a new sensor but exactly the same problem.

*when choosing "WOT compensation from WOT compensation tables" it goes to 12.5-13.0.even when I have changed the 9 & 10 coloms to 11.6. And I also noticed that the tables dont have any colums in high pressure/boost.
Attachments
dynoLog345hk_KLARaug2018.kdl
new logthat wont show richer than 11.4
(200.48 KiB) Downloaded 118 times
Areil_438hk_Log2.kdl
old log showing AFs down as low as 10.4.
(140.26 KiB) Downloaded 117 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: PRB oem lambda doesnt read richer then 11.4 anymore!

Post by Spunkster »

You have not posted your calibration.
Post Reply