PRL Race Intake - Civic sport hatch 17' (6MT)

Civic 2016+ 1.5 Turbo
Post Reply
Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Wed Sep 26, 2018 12:47 pm

I recently bought a race PRL intake for my civic hatch. I have been trying to calibrate the AFM myself but I am a little confuse. I am running a +9psi -AEM CAI/SRI basemap but still running too lean and the CEL still on. any suggestions. Hondata, are you thinking to put a basemap for this intake anytime soon?

Thanks.

User avatar
Hondata
Site Admin
Posts: 8546
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Hondata » Wed Sep 26, 2018 4:04 pm

Every intake we've tested have been close to stock in calibration. Make sure the clamps are on evenly and there are no air leaks.

Are you getting an error code? What do the fuel trims look like?
Hondata

Jun43
Posts: 251
Joined: Mon Aug 01, 2016 2:59 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Jun43 » Wed Sep 26, 2018 6:18 pm

Hondata wrote:
Wed Sep 26, 2018 4:04 pm
Every intake we've tested have been close to stock in calibration. Make sure the clamps are on evenly and there are no air leaks.

Are you getting an error code? What do the fuel trims look like?
he's using the PRL RACE MAF housing

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Thu Sep 27, 2018 6:23 am

That is correct, is a Race housing, I managed to increased the AFM Mass flow by 30% and the S.TRIM still reading between 11.97% to 29% and the L.TRIM 11.97%.So far, I don't have any code but I was getting a 2101 code running too lean. It was reading 33%+ and 15% on idle. I checked all the clamps and everything looks good.

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Thu Sep 27, 2018 6:39 am

this is my graph.
Attachments
data11.PNG
data11.PNG (34.66 KiB) Viewed 543 times

Jun43
Posts: 251
Joined: Mon Aug 01, 2016 2:59 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Jun43 » Thu Sep 27, 2018 7:20 am

i would not drive on that unless you tune your AFM

you can start by adding 25% everywhere on your table

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Thu Sep 27, 2018 8:05 am

Thanks for the advice. I played with the AFM mass flow, increased 50% from .09v to 4.0v. this is the result.
Attachments
data 12.PNG
data 12.PNG (38.83 KiB) Viewed 541 times

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Thu Sep 27, 2018 8:26 am

second datalog. with WOT test.
Attachments
data13.PNG
data13.PNG (48.93 KiB) Viewed 541 times

Jun43
Posts: 251
Joined: Mon Aug 01, 2016 2:59 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Jun43 » Thu Sep 27, 2018 10:07 am

you should disable your long term(min/max 0%) then datalog to see what your fuel trim is

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Fri Sep 28, 2018 2:07 am

This is the LTRIM graph.
Attachments
data13L.PNG
data13L.PNG (29.65 KiB) Viewed 530 times

Iperez87
Posts: 7
Joined: Fri Oct 20, 2017 8:27 pm

Re: PRL Race Intake - Civic sport hatch 17' (6MT)

Post by Iperez87 » Sat Sep 29, 2018 4:10 pm

Thanks Hondata to fix the problem in the update. :)

Post Reply