Quick question regarding an ECU code

Post your non-Hondata questions / problems here.
Locked
btf
Posts: 96
Joined: Thu Oct 30, 2008 3:25 pm

Quick question regarding an ECU code

Post by btf »

This is the third and final forum i'm going to post in before i give up :x . Long story short, if i type in the code i have on the harness can you guys tell me from what year this is? i need to know what year my engine was made so i know whether i change my flywheel or not... code on the harness is:
32110-PRD-0004 000301
under the bar code there's: HH3T 0003* 004-04
PR8urvtec
Posts: 109
Joined: Sat Dec 06, 2008 6:59 pm
Location: New Orleans, LA

Post by PR8urvtec »

What do you mean ECU code? I believe there is a thread on identifying ECU's.

What does that have to do with the flywheel?

Your question is confusing. What are you trying to do?

http://www.hondata.com/vehicles.html
btf
Posts: 96
Joined: Thu Oct 30, 2008 3:25 pm

Post by btf »

sorry i meant the code on the harness. the thing is i blew my old engine and bought a k20a2 complete with harness and a gearbox, and put the new engine/gearbox in the car. i drive an 04 civic type r. the thing is all ctr's before 04 had a flywheel which is 13 pounds or so, and the 04+(one i have) is 10. so if the engine/gearbox i bought are 04 or later, i won't need to change the flywheel, if it's earlier, i would because it affects performance. so i'd like to know what year it is before taking the gearbox apart, and figured if i supplied the code on the harness maybe someone could tell me what year this was taken from
Locked