My Flashpro and TC were both plugged in during the datalogs.Hondata wrote:Thanks for your patience. From the datalogs we can see that a FlashPro setting of EGRL datalogs the ELD pin and a FlashPro setting of ELD doesn't do anything sensible (your point #2). We've traced this back to the Euro (& Asia, but not US) S2000 code, and fixed the problem. Even so, I would expect that it would work in the configuration for datalogs #0 & #1.
I'll make a new software version very shortly.
In any case, you will need to download & install the updated FlashProManager, then re-test. When you make datalogs I suggest plugging in both the FlashPro and TractionControl units at the same time; in this way the FlashPro datalog will contain wheel speed & other information.
One other observation: Today I uplugged the wiring harness from the TC control box. Flashpro calibration was still set to "EGRL." But even with the harness unplugged, if you set the software to EGRL, you get a severe ignition retard as soon as you hit the TC min RPM. So it seems like your software is taking the wrong input for "EGRL."
When do you anticipate the revision to come out?