03 Ep3 will not charge after K24A2 swap

K-Series Programmable ECU installation questions / support issues
Post Reply
Usedtobered
Posts: 2
Joined: Wed Jul 05, 2017 6:29 pm

03 Ep3 will not charge after K24A2 swap

Post by Usedtobered »

Hey guys! I was hoping you could help me with a technical problem I'm having. I recently purchased a 2003 civic si. I t then blew up. After that I decided to swap a K24A2 out of a 2004 tsx. I have everything in and wired up but for some reason the alternator does not charge the battery. Is there something I'm missing? Please help
User avatar
Spunkster
Site Admin
Posts: 22817
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 03 Ep3 will not charge after K24A2 swap

Post by Spunkster »

This sounds like something is not connected properly. Go over all the wiring and make sure that none of the wires have been damaged and are connected properly.
Usedtobered
Posts: 2
Joined: Wed Jul 05, 2017 6:29 pm

Re: 03 Ep3 will not charge after K24A2 swap

Post by Usedtobered »

Thank you for that! The only wire that I'm having problems with is a small one that come off of the a/c compressor. Would this be an issue?
User avatar
Spunkster
Site Admin
Posts: 22817
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 03 Ep3 will not charge after K24A2 swap

Post by Spunkster »

You will need to look at the factory service manual to trace the wires and narrow down where the problem might be.
Post Reply