Injector question

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
kgreenaway
Posts: 2
Joined: Wed Sep 19, 2018 2:28 pm

Injector question

Post by kgreenaway »

I'm a new user and have a 2018 Type R. What is the difference between the 1560 and 310 for the injectors? All the maps have 1560 but two and I have/ordered injen intercooler, injen intake, AFE downpipe, AFE Midpipe and Borla Exhauest. do I need to upgrade my stock injectors?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Injector question

Post by Hondata »

The injector size for all the calibrations should be 1560. We'll fix this. The injector size is not used in the FK2/FK8 as no aftermarket injectors are available.
Hondata
kgreenaway
Posts: 2
Joined: Wed Sep 19, 2018 2:28 pm

Re: Injector question

Post by kgreenaway »

Thanks for the info.
FK8_K20c1
Posts: 13
Joined: Wed May 01, 2019 5:02 am
Location: Indiana

Re: Injector question

Post by FK8_K20c1 »

So the factory Injector size on the fk8 is 1560cc?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Injector question

Post by Hondata »

It is not used. In this case we just made them all the same for consistency.
Hondata
FK8_K20c1
Posts: 13
Joined: Wed May 01, 2019 5:02 am
Location: Indiana

Re: Injector question

Post by FK8_K20c1 »

Ok, but what is the size of the oem injectors?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Injector question

Post by Hondata »

We can not measure the flow of the direct injectors.
Hondata
mcmario
Posts: 4
Joined: Fri Apr 12, 2019 4:56 pm

Re: Injector question

Post by mcmario »

hi i just installed xdi pump with 1650cc injectors having trouble now im throwing a p0133 code every one is telling me that the hondata cant suport these bigger injectors as of yet is this ture ? and if so is there any plans to make it work with hondata in the near future thx
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Injector question

Post by Spunkster »

There are injector size settings in the software in the fuel section of the calibration window.
Post Reply