Help - Smanager stops datalogging TC wheels speeds after some time

carnot
Posts: 46
Joined: Mon Jun 14, 2010 6:14 pm

Re: Help - Smanager stops datalogging TC wheels speeds after some time

Post by carnot »

Yes, if I unplug the USB and plug it back in it begins showing live data and datalogging correctly. This can be seen in the attached datalog around the 34 sec mark. You can also see that after about the 9min mark the wheel speed sensors stop logging again. The lid is closed and screen off on my laptop while driving around so I do not think it is the screen going to sleep. The other indication it's not related to an inactivity timer on the laptop is that the time at which is stops datalogging is not consistent......sometimes it stops after 5 mins or so, sometimes 10ish, sometimes 12-15 mins. Thank you for the help.
Attachments
THT - 12.18.2019v1.skl
(43.04 KiB) Downloaded 274 times
12.18.2019m.s3d
(4.74 MiB) Downloaded 247 times
THT TC 12.7.2019.tcc
(1.41 KiB) Downloaded 269 times
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Help - Smanager stops datalogging TC wheels speeds after some time

Post by Spunkster »

If unplugging it and plugging it back in resolves it, then it may just be some kind of interference that is causing it to stop datalogging. YOu could try a different USB cable or check your spark plugs to make sure that they are clean and resistor type.
Post Reply