TC speed sreading over canbus

Post Reply
dc5itr01
Posts: 61
Joined: Tue May 24, 2016 2:14 pm

TC speed sreading over canbus

Post by dc5itr01 »

.
If I use hondata TC , can the speed signal be sent out of kpro4 via canbus? I have a device that can only receive speed signal via canbus.
If this is possible, will It send a signal vehicle speed, or send speed of each wheel or both?


Without TC, and the speed sensor connected to manual tranny, does kpro4 send speed signal over canbus?
User avatar
Hondata
Site Admin
Posts: 10221
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC speed sreading over canbus

Post by Hondata »

The TC outputs the wheel speeds on CAN. The KPro4 only outputs the vehicle speed on CAN.

http://www.hondata.com/help/kmanager/can_output.htm

http://www.hondata.com/help/tractioncon ... output.htm
Hondata
dc5itr01
Posts: 61
Joined: Tue May 24, 2016 2:14 pm

Re: TC speed sreading over canbus

Post by dc5itr01 »

Any chance kpro4 can receive sequential spark cut over canbus?
User avatar
Hondata
Site Admin
Posts: 10221
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC speed sreading over canbus

Post by Hondata »

Sorry, No.
Hondata
dc5itr01
Posts: 61
Joined: Tue May 24, 2016 2:14 pm

Re: TC speed sreading over canbus

Post by dc5itr01 »

Can kpro accept any infomation over canbus?
User avatar
Hondata
Site Admin
Posts: 10221
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: TC speed sreading over canbus

Post by Hondata »

No.
Hondata
dc5itr01
Posts: 61
Joined: Tue May 24, 2016 2:14 pm

Re: TC speed sreading over canbus

Post by dc5itr01 »

😭
Post Reply