Looking for help with base map for k24a3 turbo swap
Looking for help with base map for k24a3 turbo swap
I have a new clutch kit and I am looking for something that will be good enough to put break in miles on without damaging from boost. After I get the break in done I plan to get a real tune. I feel like I can get the stock map working good but I'm concerned about my inexperience with boost tables and all that. Can anyone help me out?
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Looking for help with base map for k24a3 turbo swap
I can help you out. Post the calibration file and a datalog.
-Ed
-Ed
Instagram: calibrated.tuning
Re: Looking for help with base map for k24a3 turbo swap
OK thanks! I am unable to drive till I get my intermediate shaft. Do I need to be able to drive it to get the best datalog for you?
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Looking for help with base map for k24a3 turbo swap
Yes you need to datalog the car driving.
-Ed
Instagram: calibrated.tuning
Re: Looking for help with base map for k24a3 turbo swap
Hey Ed, hopefully your still around. I since had to work several things out before getting it out on the road but I was finally able to. Here is my calibration and a datalog. I appreciate any assistance.
Edit: I only have the first half of the downpipe connected with the wideband in it so I am not sure if that's why my AFR is all over the place.
Edit: I only have the first half of the downpipe connected with the wideband in it so I am not sure if that's why my AFR is all over the place.
- Attachments
-
- first test drive.kdl
- (3.56 MiB) Downloaded 64 times
-
- first test drive base tune.kal
- (19.81 KiB) Downloaded 60 times
Re: Looking for help with base map for k24a3 turbo swap
Scratch that first datalog Ed, Here is an actual driving log. That first one I had P/S issues and couldnt really drive it normally.
- Attachments
-
- second test drive to gas station.kdl
- (2.01 MiB) Downloaded 62 times
Re: Looking for help with base map for k24a3 turbo swap
Im sorry my intention is not to bump this post I just cant seem to upload the correct datalog.
- Attachments
-
- second test drive return trip.kdl
- (6.33 MiB) Downloaded 62 times
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Looking for help with base map for k24a3 turbo swap
The calibration file does not seem to be to far off. What is the plan for the car? Do you plan to get it Etuned or will you get it Dyno tuned?
-Ed
-Ed
Instagram: calibrated.tuning
Re: Looking for help with base map for k24a3 turbo swap
That's good news! Currently I need to put at least 300 miles to break in the clutch at under 4k rpm I believe. After that I plan to have it dyno tuned. Although I'm open to an etune.
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Looking for help with base map for k24a3 turbo swap
You’re fine as long as you don’t drive it hard. I am able to provide you with an Etune. I PMd you the details.
-Ed
Instagram: calibrated.tuning
-
- Posts: 1
- Joined: Wed Jul 27, 2022 8:45 pm
Re: Looking for help with base map for k24a3 turbo swap
Hey bro mind if I get those data as well, having a hard time driving my car. I recently upgraded to k24A3 with turbo. I wold really appreciate it if someone help me with this issues. (VSA + triangle with ! On, and engine light is on.
Cheers🤙🏻
Cheers🤙🏻
- CalibratEd
- Posts: 1468
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Looking for help with base map for k24a3 turbo swap
I suggest you start your own thread and write the details of your build and the issue you are having.success.erven wrote: ↑Thu Jul 28, 2022 6:28 pm Hey bro mind if I get those data as well, having a hard time driving my car. I recently upgraded to k24A3 with turbo. I wold really appreciate it if someone help me with this issues. (VSA + triangle with ! On, and engine light is on.
Cheers🤙🏻
-Ed
Instagram: calibrated.tuning