Page 1 of 1
Switch Module LED Colour
Posted: Fri Jul 23, 2021 11:07 am
by Bones126
Hi,
I've fitted an second-hand traction control unit via the instructions on the site, but i can't find what the switch module led colour means. Mine is currently red which would suggest an error.
Could someone confirm please?
thanks
Re: Switch Module LED Colour
Posted: Fri Jul 23, 2021 11:19 am
by Hondata
Use the TC software and you will see any errors.
Re: Switch Module LED Colour
Posted: Fri Jul 23, 2021 11:49 am
by Bones126
Thanks, will give it a go.
Re: Switch Module LED Colour
Posted: Sun Jul 25, 2021 12:11 pm
by Bones126
Hondata wrote: ↑Fri Jul 23, 2021 11:19 am
Use the TC software and you will see any errors.
Hi, it’s saying the following
Error code 4 - LR WHEEL SIGNAL
Error code 5 - RR WHEEL SIGNAL.
thanks.
Re: Switch Module LED Colour
Posted: Sun Jul 25, 2021 3:17 pm
by Hondata
Clear the errors with the software and see if they come back.
Re: Switch Module LED Colour
Posted: Wed Jul 28, 2021 5:32 am
by Bones126
Hondata wrote: ↑Sun Jul 25, 2021 3:17 pm
Clear the errors with the software and see if they come back.
Thanks, cleared error codes and all OK now.
Possibly threw the errors up as it had been on the Dyno for tuning and back wheels not turning while the fronts were.
Thank you for you help.