09 Si help with hybrid racing intake tune.
Re: 09 Si help with hybrid racing intake tune.
Sweet that’s good to hear I was getting nervous! And I thought I was in open loop I was asking how to get back close but I guess it did it on its own and yes that is my setup for a while! I am ready to tune it.
Re: 09 Si help with hybrid racing intake tune.
Yeah it all looks good. I'll keep an eye on everything as we go, but it looks fine so I don't see any issues.
Here is the first calibration. This is the 0* cam angle with vtec at 4500. Same datalogs like you've been doing, twenty minutes or so and the one third gear WOT pull. The 0* cam is kind of boring, so don't get discouraged when it doesn't feel strong.
Here is the first calibration. This is the 0* cam angle with vtec at 4500. Same datalogs like you've been doing, twenty minutes or so and the one third gear WOT pull. The 0* cam is kind of boring, so don't get discouraged when it doesn't feel strong.
Re: 09 Si help with hybrid racing intake tune.
So I have the Hondata app on my phone to monitor some things while I drive and I noticed the O2 voltage steadily goes from .3 or so up to between 4.0 and 5.0 and then back down. Does that sound bad to you.
Re: 09 Si help with hybrid racing intake tune.
The voltage will oscillate as you drive. that's how it sends it's reading to the ECU. It converts volts to AFR.
Re: 09 Si help with hybrid racing intake tune.
Ahh I see, thank you!
Re: 09 Si help with hybrid racing intake tune.
Well here is the datalog with 0-degree cam angle!
- Attachments
-
- 07 march22.fpdl
- (561.23 KiB) Downloaded 61 times
Re: 09 Si help with hybrid racing intake tune.
Yeah it looks really good for a start. Unfortunately I didn't see a clean third gear WOT pull from 2500-8600 in the datalog. We'll need to make another one with the clean third gear pull so I can finish the 0* cam table. You can take it for a ten minute datalog on this one, we really just need the clean third gear pull from 2500-8600.
Re: 09 Si help with hybrid racing intake tune.
I got it heres a clean pull.
- Attachments
-
- 08march22.fpdl
- (511.97 KiB) Downloaded 57 times
Re: 09 Si help with hybrid racing intake tune.
Okay that one looks great. We will now move to the 15* cam angle with vtec at 4500. Go back to the twenty minute datalogs with stop and go driving, and a clean third gear WOT pull from 2500-8600. We'll see how it looks.
Re: 09 Si help with hybrid racing intake tune.
does this look ok? I always get cut off on my 3rd gear pulls lol.
- Attachments
-
- 08 march 15 degree.fpdl
- (1.46 MiB) Downloaded 58 times
Re: 09 Si help with hybrid racing intake tune.
No problem on coming up short, I worked with it. Better to be safe on the road than risk it by running it out. We will now move to the 30* cam angle with vtec at 4500 again. Take this one for the same type of datalog and driving style. And tell everyone on the road to stay out of your way. Haha.
Re: 09 Si help with hybrid racing intake tune.
well here it is. I couldnt get a pull on first log so i tried again. Every road where I live unfortunately is full of traffic lol.
- Attachments
-
- datalog0002.fpdl
- (667.52 KiB) Downloaded 52 times
-
- 09 march 30 cam.fpdl
- (694.69 KiB) Downloaded 58 times
Re: 09 Si help with hybrid racing intake tune.
Yeah it looks really good. We will now move to the 40* cam angle with vtec at 5500. For this one, you can do a ten minute datalog, just be sure to get a clean third gear WOT pull as best you can. And try to run it out to at least 8000, tell all the people in traffic to move out of the way. Haha. Just kidding, be safe.
Re: 09 Si help with hybrid racing intake tune.
Hey I’m sorry I ended up having to go out of town so I’ve not been around my car but when I’m back next week I’ll get you the log for that one! I’ll have to find a better street and actually get a 3rd gear pull lol
Re: 09 Si help with hybrid racing intake tune.
No problem, we'll get back to it when you have time.