Rev Bounce After Hondata Reflash 2014 Si
Re: Rev Bounce After Hondata Reflash 2014 Si
Okay i was able to finally do a test, the car is responding well! its much more responsive on the throttle and shifting. I had a hard time getting some good pulls today but i do believe i got atleast 1 good one. datalog0004 is the 20 min one and i attached a 2nd datalog that is about 10 mins i know its probably not gonna help much but i made it so i figured it cant hurt to include it
- Attachments
-
- datalog0004.fpdl
- (4.62 MiB) Downloaded 118 times
-
- datalog0005.fpdl
- (1.99 MiB) Downloaded 106 times
Re: Rev Bounce After Hondata Reflash 2014 Si
Yeah it looks good. No knock again, so I think we're good there. I made a couple small fuel tweaks, I'm nitpicking at this point. Take this one for a spin when you can, no rush. At this point you can just datalog drives when you go somewhere if you want, no need to run out and make aimless drivers unless you want to. It's 99% there basically.
Re: Rev Bounce After Hondata Reflash 2014 Si
Okay sounds good! I will datalog the next time I go out! Thanks again for your help! I'm glad you were able to fix it so quickly
Re: Rev Bounce After Hondata Reflash 2014 Si
That works, you're welcome. I'm glad it worked out quickly too. That offsets all the ones that aren't so easy, haha.
Re: Rev Bounce After Hondata Reflash 2014 Si
Hey I was finally able to drive since we last talked. I wasnt able to get a very good 3rd gear pull this time though. I was also wondering what my IAT look like? its starting to get warmer where I live I know the intake doesnt sit in the best spot for cooling haha. Im wrapping the tube in thermal tape today anyways but was wondering how they have been looking?
- Attachments
-
- datalog0006.fpdl
- (4.51 MiB) Downloaded 112 times
Re: Rev Bounce After Hondata Reflash 2014 Si
Yeah all the fuel stuff looks really good. The IATs look fine for the most part, they're in the 60-70* F range, towards the end on a long idle they got up to 100* F. Not sure what the ambient temperature is so can't say for certain, but they weren't any warmer than your last datalog.
I made some ignition adjustments for knock. Other than that it all looked really good.
I made some ignition adjustments for knock. Other than that it all looked really good.
Re: Rev Bounce After Hondata Reflash 2014 Si
Sorry for such a late reply! i got so busy with work than the battery went bad so i just havent had a chance to drive it. I finally did today and here is the new datalog. Let me know how it is
- Attachments
-
- datalog0007.fpdl
- (4.19 MiB) Downloaded 116 times
Re: Rev Bounce After Hondata Reflash 2014 Si
Things looks pretty good in that one, no knock. Make another datalog when you can and we'll see if it stays as consistent.
Re: Rev Bounce After Hondata Reflash 2014 Si
Hey eficu I've been having a issue with emission inspection, I can't seem to get my O2 and catalyst monitors ready. Can this be because of the flash, like is it possible that one of the O2 sensors is turned off?