Skunk2 CAI and FlashPro

2012+ US/Canadian Civic Si / 2013+ ILX
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

It doesn't look too bad at all. I made a couple WOT fuel changes and some ignition for the knock. Take this one for a spin when you can.
Joshua97.HondataTest2.fpcal
(22.23 KiB) Downloaded 69 times
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Hey here's a data log from the previous calibration you uploaded. Thank you!
datalog0028.fpdl
(3.03 MiB) Downloaded 66 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

Made some small adjustments for knock in this one. Take it for a spin when you can.
Joshua97.HondataTest3.fpcal
(22.26 KiB) Downloaded 65 times
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Here's a data log from the most previous calibration you uploaded. Thanks!
datalog0029.fpdl
(4.29 MiB) Downloaded 70 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

Not too bad, still a few knock so I made some changes. It was mostly on your 6th gear cruising. So we'll see how it looks in this one.
Joshua97.HondataTest4.fpcal
(22.32 KiB) Downloaded 72 times
ninoromo
Posts: 1
Joined: Thu May 19, 2022 1:46 pm

Re: Skunk2 CAI and FlashPro

Post by ninoromo »

Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

ninoromo wrote: Thu May 19, 2022 2:01 pm Hello, I also have a 3.5" intake (k-tuned) and live at about 4000 feet above sea level. would one of the tunes aforementioned be appropriate/ safe? Or would I be better off using the sri/.../ catback basetune? I am all stock besides intake and flashpro. Thanks!
What year is your car?
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Hey sorry for the late reply. Had a shit show of a week but I was able to go out and collect a datalog for you with the most recent calibration you sent. Thanks!
datalog0030.fpdl
(4.86 MiB) Downloaded 75 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

No problem. That one looked pretty good. No knock which is good, so make another one when you can and we'll see if it stays knock free.
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Hey here's a datalog from the same calibration. Everything feels good especially at WOT.
datalog0031.fpdl
(4.69 MiB) Downloaded 64 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

Yep it looks really good. We had a couple knock on the fourth gear and fifth gear pull. So I made a small adjustments there. All the fuel stuff looks great. Take this one for a spin when you can, no rush!
Joshua97.HondataTest5.fpcal
(22.24 KiB) Downloaded 75 times
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Here's a datalog for you from the recent calibration you sent me! Thank you!
datalog0032.fpdl
(4.26 MiB) Downloaded 70 times
EFICU
Posts: 3295
Joined: Mon Feb 25, 2019 10:14 pm

Re: Skunk2 CAI and FlashPro

Post by EFICU »

Made some small adjustments for the knock again. See how this one looks.
Joshua97.HondataTest6.fpcal
(22.36 KiB) Downloaded 150 times
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

Cool, here's a datalog from that calibration. Thank you!
datalog0033.fpdl
(4.32 MiB) Downloaded 63 times
Joshua97
Posts: 32
Joined: Tue Apr 12, 2022 7:27 am

Re: Skunk2 CAI and FlashPro

Post by Joshua97 »

I recently ordered a Skunk2 Megapower RR 76mm cat back exhaust. Should be here in a couple weeks. Any chance we can tweak the current calibration to get the most performance out of it or would we need to restart with a fresh calibration?
Post Reply