please help

FlashPro questions & answers specific to the 2006-2011 Americas Civic Si
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

You can go either 3.5 or 3.0. They will both provide more air than the throttle body can ingest at any given time. Even if you go with a bigger TB in the future, the 3.0 would be plenty, but the 3.5 means you never have to wonder. But honestly either of them are fine and will work great. You just have to make sure you let me know before you install it, we have to change the tune from a MAF calibration to speed density before you start it.

How soon do you think you would purchase it?
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

i just placed an order, it might take a week or two, i will let you know when i receive it
got the 3.5" pipe
KTD-SR8-35F
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Sounds good. We'll definitely start fresh with the tune for that and see how it all goes. It will be interesting to see how the knock changes, if at all with the new tune strategy. We'll see.
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

Alright will talk to you as soon as it comes :D
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

hey buddy i just received my intake, will probably install it on Saturday or Sunday
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Sounds good. I went ahead and reset everything ignition wise and fuel for the new intake. Just in case ignition is impacted by the new efficiency of the intake we can start fresh. So here is the first one. This one is speed density ready for the new intake. Datalogs again shoot for the 20 minute range and the one third gear WOT pull. Then we'll see how it looks.
Chocolateman.SD.Rev16 (Blended)(Vtec4600).fpcal
(22.94 KiB) Downloaded 6 times
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

alright, should i upload this after the installation before starting the engine?
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Correct, once you're done with the install load this calibration before starting the car. If you run the old calibration, it might throw codes and/or not run right. The MAF sensor will no longer get a good reading, so it needs to be running speed density which the new calibration does.
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

alright hopefully i get to install it tomorrow :D
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Sounds good. We'll see how it looks.
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

hey buddy, i finally installed the intake and did a quick drive
but unfortunately the file got corrupted i cant load it. will do another one tomorrow.
do i have to reupload the map before doing that?
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

BTW car feels good and I've seen 4 knocks on hondata app
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Glad it feels solid. No you don't have to re-upload the calibration. You can just take it for a drive when you can.
chocolateman
Posts: 58
Joined: Sat Apr 23, 2022 1:00 pm

Re: please help

Post by chocolateman »

i made 2 datalogs just in case one got corrupted
the first one i did the 3rd gear WOT, the 2nd one just normal driving
they look good
Attachments
datalog0002.fpdl
(592.67 KiB) Downloaded 7 times
datalog0001.fpdl
(708.15 KiB) Downloaded 7 times
EFICU
Posts: 3299
Joined: Mon Feb 25, 2019 10:14 pm

Re: please help

Post by EFICU »

Yeah it looks really good, almost nailed it. I made some fuel adjustments, but I might end up making some cam angle adjustments after the next one. Go ahead and take this one for a spin, shoot for 20 minutes in length and at least one third gear pull. But feel free to have some fun with it if you want.
Chocolateman.SD.Rev17 (Blended)(Vtec4600).fpcal
(23.04 KiB) Downloaded 8 times
Post Reply