Hoping someone has a solution to this issue. App works great apart from occasionally refusing to connect without app restart. The issue I'm having is that the boost pressure display reads perfect till it reaches 11.2 psi, then it pegs there till you let off. Kpro v4 logs are reading perfectly fine, boost on current setting peaks and holds at 15.2~ psi. Confirmed with a friend's external gauge temporarily plumbed into my car.
Any ideas how I can resolve this?
Thanks in advance
UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
What MAP sensor are you using?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
It's a Hondata 4 Bar
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Has been selected as such in the map sensor drop down box
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Post your calibration and a datalog showing the issue.
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
I'll do so once I'm home with the laptop. Map sensor reads accurate with no issues on the logs. just stops reading at 11.2 PSI on the app. Even if you watch the live data on ''display'' tab in the laptop software while accelerating, it climbs past 11.2 psi to it's peak and the app follows along until this point. Very annoying, as the app is great otherwise!
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
please find attached a datalog and calibration
- Attachments
-
- gmx25 15 PSI 99 quickspool.kal
- (18.57 KiB) Downloaded 86 times
-
- 15 psi.kdl
- (4.3 MiB) Downloaded 90 times
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
What is the version of the app you are using?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
What settings to you have set for that sensor in the app?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Here, see attached
- Screenshot_20220521-211535.png (54.58 KiB) Viewed 2118 times
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Any ideas what the issue could be?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Is this the android or ios app?
Hondata
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Any further ideas on what I can try? I'd like to get this problem resolved.
Thank you
Thank you