Laptop died while uploading new calibration
Laptop died while uploading new calibration
Last night I was uploading a new calibration to my 2021 CTR when my laptop died, now the car wont start and is in a recovery mode. The Laptop doesn’t read the ECU so it’s not telling me any kind of information on whether or not it detects the recovery mode of the car. Please help
Re: Laptop died while uploading new calibration
An upload from the FlashPro is independent from the laptop so it does not matter if the laptop is switch off or disconnected.
Unplug everything, switch off the ignition, plug everything back in and then return the ECU to stock.
Unplug everything, switch off the ignition, plug everything back in and then return the ECU to stock.
Hondata
Re: Laptop died while uploading new calibration
Will give this a shot and keep you updated thanks!
Re: Laptop died while uploading new calibration
It worked! Thank you so much appreciate it!
-
- Posts: 2
- Joined: Mon Dec 19, 2022 9:49 pm
Re: Laptop died while uploading new calibration
Sorry to revive this post, but same thing happened to my 2022 civic, i was returning ecu to stock and my laptop died on me in the beginning and now my car is locked and I'm unable to even do anything at all. I have unplugged the flashpro and that has not worked, when I click to unlock my car it tells me that it does not recognize the vin, this flashpro has only been on this car and no other car, i bought it from hondata.
Re: Laptop died while uploading new calibration
Did you try the instructions as given in the second post?
Hondata