2014 SI Basemaps
-
- Posts: 5
- Joined: Sun Jun 26, 2022 8:43 am
2014 SI Basemaps
Hey, I have a 2014 SI that has Exhaust and an Acuity CAI. Car is running lean and just trying to get some help with some basemaps
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: 2014 SI Basemaps
Post the calibration file you are running ad a normal driving datalog. I can take a look at it.AlexWanovich wrote: ↑Mon Jul 04, 2022 12:07 pm Hey, I have a 2014 SI that has Exhaust and an Acuity CAI. Car is running lean and just trying to get some help with some basemaps
-Ed
Instagram: calibrated.tuning
-
- Posts: 5
- Joined: Sun Jun 26, 2022 8:43 am
Re: 2014 SI Basemaps
I appreciate it Ed, I’ll post calibration and datalog this weekend.CalibratEd wrote: ↑Wed Aug 03, 2022 9:39 amPost the calibration file you are running ad a normal driving datalog. I can take a look at it.AlexWanovich wrote: ↑Mon Jul 04, 2022 12:07 pm Hey, I have a 2014 SI that has Exhaust and an Acuity CAI. Car is running lean and just trying to get some help with some basemaps
-Ed
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
-
- Posts: 5
- Joined: Sun Jun 26, 2022 8:43 am
Re: 2014 SI Basemaps
Here's the calibration I'm using, its just the base PRL intake one on hondata. And did two datalogs first is casual highway with few pulls at end and second is in town driving
- Attachments
-
- datalog0001.fpdl
- (1.77 MiB) Downloaded 57 times
-
- datalog0003.fpdl
- (2 MiB) Downloaded 55 times
-
- Cal1.fpcal
- (19.69 KiB) Downloaded 55 times
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: 2014 SI Basemaps
I switched the tune to speed density. Create a normal driving log.
-Ed
-Ed
- Attachments
-
- AlexWanovich_Base.fpcal
- (20.63 KiB) Downloaded 52 times
Instagram: calibrated.tuning
-
- Posts: 5
- Joined: Sun Jun 26, 2022 8:43 am
Re: 2014 SI Basemaps
Alright I'll try it out this weekend and get a couple logs posted. sorry for late response started school so just been super busy past couple weeksCalibratEd wrote: ↑Sat Aug 20, 2022 6:57 pm I switched the tune to speed density. Create a normal driving log.
-Ed
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
-
- Posts: 5
- Joined: Sun Jun 26, 2022 8:43 am
Re: 2014 SI Basemaps
Car is dying on start, starts up then dies 3 seconds later
- Attachments
-
- Test.fpdl
- (25.64 KiB) Downloaded 47 times
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: 2014 SI Basemaps
I added fuel to the base table to see if it needs fuel. Make sure the car is not throwing any codes. Create a log to see if the car will idle.
-Ed
-Ed
- Attachments
-
- AlexWanovich_Rev1.fpcal
- (20.64 KiB) Downloaded 50 times
Instagram: calibrated.tuning