What Base Map Should I Use?

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
lukejmassey
Posts: 4
Joined: Sat Apr 16, 2022 5:28 pm

What Base Map Should I Use?

Post by lukejmassey »

Pretty simple question. I'm going to install a K-Tuned 3.5 inch SRI soon, and I'm not sure what map to use. The only other performance mod is a Invidia Q300 Catback Exhaust. K-Tuned's website says to use a MAP based tune. What should I use when it's installed?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: What Base Map Should I Use?

Post by Spunkster »

This will most likely require custom tuning on the dyno as we do not have anything for a 3.5 inch intake.
lukejmassey
Posts: 4
Joined: Sat Apr 16, 2022 5:28 pm

Re: What Base Map Should I Use?

Post by lukejmassey »

Spunkster wrote: Mon Jul 11, 2022 9:04 am This will most likely require custom tuning on the dyno as we do not have anything for a 3.5 inch intake.
The problem is that I plan on getting a down pipe within a month or so, and want to wait to tune it, but I’m a bit eager to get the intake on. Is there a base map that will allow me to just drive the car safely? Or will I just have to wait to get it properly tuned?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: What Base Map Should I Use?

Post by Spunkster »

I would wait to put it on and tune it all together.
Post Reply