2008 S2000 bricked flash pro

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

2008 S2000 bricked flash pro

Post by mikedoubleg »

Hello,

I have 2 s2000 with flash pro. Both are AP2 with drive by wire. On my second one, I bought the car with flash pro already I stalled as it was already boosted. I unfortunately had to rebuild the motor which is fine.

My issue is I can’t connect to the flash pro module anymore. I have a new turbo and injector but can’t click on anything in the manager on that car.

What can I do?

Also, any news on offering EBC again?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2008 S2000 bricked flash pro

Post by Spunkster »

What is the serial umber that is on the FlashPro?

From Help, About, what is the version of software you are using?
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

Re: 2008 S2000 bricked flash pro

Post by mikedoubleg »

Hello,
My serial number is FP-S2K-US-31825 and i'm on flashpro manager version is 3.9.5.0 build 2689.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2008 S2000 bricked flash pro

Post by Spunkster »

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

Re: 2008 S2000 bricked flash pro

Post by mikedoubleg »

Hello,

Under the help menu, "Send feedback to Hondata" is grayed out and I can't select it. The key position is "On". The flashpro does blink green when the car is connected to it and also does flash green when I connect my computer to it.

I did verify that the computer works by connecting it to my other car. Is there any way to hard reset the device? I don't care about the tune stored in it as the car needs to be re-tuned as I've changed the turbo, injectors, and valvetrain.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2008 S2000 bricked flash pro

Post by Spunkster »

With the USB plugged in what shows up in the lower left corner of the software?
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

Re: 2008 S2000 bricked flash pro

Post by mikedoubleg »

I made a quick video below

https://youtu.be/-C_A38jkhaY
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

Re: 2008 S2000 bricked flash pro

Post by mikedoubleg »

Whether I plug flash pro:
1. USB only
2. OBD2 only
3. Both USB and OBD2
The same green status light is flashing.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2008 S2000 bricked flash pro

Post by Spunkster »

Send and email so support <at> hondata.com with the following and I will issue an RMA and give you further
instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

Include a link to this thread.
mikedoubleg
Posts: 6
Joined: Thu Jul 14, 2022 7:07 pm

Re: 2008 S2000 bricked flash pro

Post by mikedoubleg »

Sounds good. Thank you for the help. Will keep the forum updated in case someone else has the same issue.

Cheers!
Post Reply