injector dead times help 2200 cc dead time car wont rev pass 2k while on load

s300 and SManager software questions & answers
Post Reply
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Post by Dtuned3 »

so recently put this build together ls vtec hondata 4 bar 2200cc bosch but ever since car wont go past 2k i recently created a topic and i was pointed i the direction that maybe my s300 had a bad internal battery (v1) i sent it out for the upgrade and now the car has the same issue just lest violent i was able to get a datalog of this but i personally think my dead times or my injector are the issues i have tried every dead time i can possibly find for the these bosch injectors the only this left would be to actually try with a different set of injectors any suggestions would gladly help thanks in advance
Attachments
1st test.s3d
(354.92 KiB) Downloaded 74 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Post by Spunkster »

You have not posted the calibration the datalog was made with.
Dtuned3
Posts: 8
Joined: Mon Jul 18, 2022 3:42 pm

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Post by Dtuned3 »

this is the calibration
Attachments
bare map just map and injector.skl
(54.7 KiB) Downloaded 106 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Post by Spunkster »

You have the rev limit set at 2500rpm.
Post Reply