boost not stable, bouncing at high rpm

s300 and SManager software questions & answers
Post Reply
john1182
Posts: 2
Joined: Sat Sep 17, 2022 9:43 pm

boost not stable, bouncing at high rpm

Post by john1182 »

hi i am having problems with my boost not stable bouncing from 11 to 12, i have set my 4th gear @ 13psi and quick spool 2 psi lower than that.Help please..
Attachments
street 4.s3d
(76.13 KiB) Downloaded 43 times
john1182
Posts: 2
Joined: Sat Sep 17, 2022 9:43 pm

Re: boost not stable, bouncing at high rpm

Post by john1182 »

do i have to set quickspool to my commanded boost? because iam noticing that if the boost hits the quickspool it returned to 48% pwm from 100% and comes back if its below quickspool
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: boost not stable, bouncing at high rpm

Post by Spunkster »

You have not posted the calibration the datalog was made with.
Post Reply