Built b16a turbo map help

s300 and SManager software questions & answers
Post Reply
tylerfernie
Posts: 1
Joined: Wed Sep 21, 2022 1:46 pm

Built b16a turbo map help

Post by tylerfernie »

Hello, looking for any tips or adjustments needed to make on the map. Very new to this

p28 s300 v3
comp cams
je pistons
comp springs
ferrare retainers & valves
aem fuel rail & regulator
aem 340 fuel pump
t3 turbo
440cc injectors
block girdle
gude oversized throttle body
arp head studs
Attachments
high speed fuel
high speed fuel
image.jpg (3.18 MiB) Viewed 403 times
low speed fuel
low speed fuel
image.jpg (3.22 MiB) Viewed 403 times
high speed ignition
high speed ignition
image.jpg (3.4 MiB) Viewed 403 times
low speed ignition
low speed ignition
image.jpg (2.72 MiB) Viewed 403 times
DaX
Posts: 654
Joined: Tue Mar 18, 2003 3:48 pm

Re: Built b16a turbo map help

Post by DaX »

We don't have enough info to help you out. You really should take it to a tuner and have them work on it for you. Or, make a datalog and post it and the calibration here and we *might* be able to give some general suggestions, but nothing will beat having an actual tuner with the car in front of them.
Post Reply