Tsx Basemap Tune See Post for details.

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
Posts: 1
Joined: Sun Sep 25, 2022 1:18 pm

Tsx Basemap Tune See Post for details.

Post by Hybridtsxcl9 »


I will be completing my build hopefully by the end of the week and dropping it in over the weekend. I wanted to see if anyone was able to help me in creating a tune semi close or at least drivable to get to a shop and have it dialed. Mods list below, and thank you in advance.

Dc3.2 cams
95lb dual spring
Type s oil pump
50 deg cam gear
Cte supercharger with 3.2 pulley/merc large inlet/j37 TB
1050x injectors/radium rail/fuel lab fpr/ aem 340lph pump
4” intake

Dc header
Sparrow T1r exhaust

Misc bolt-on
K20 oil cooler
K20 water pump housing
Koyo aluminum radiator
Auto trans external cooler

I’m pretty new to this and would appreciate any advice or insight on build. I’m super excited to get this thing going and see what it’s capable of doing as it’ll be a weekend car for me and the kid to get out and have fun. I can also compensate anyone for their time in assisting with a tune if needed. I appreciate the help as mentioned in advance. Thank you
Current setup with built setup in bacground
Current setup with built setup in bacground
38F3C42B-DAAB-415F-A59F-319827016AB2.jpeg (4.01 MiB) Viewed 4363 times
Cams and valve train
Cams and valve train
0AC6037B-CA56-4095-A53C-4CC385700621.jpeg (3.02 MiB) Viewed 4363 times
Post Reply