Ignition timing table not showing psi

s300 and SManager software questions & answers
Post Reply
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Ignition timing table not showing psi

Post by aconforti »

When on the ignition timing table, it’s only showing in “ or mbar. I can’t get it to show psi. I tried options->units->psi. And I tried “show boost tables”. I also tried loading in a tune from the vault that would be for a turbo engine. Not sure what else to do.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

What do you have checked in the options menu?
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 10:49 am What do you have checked in the options menu?
Under units for vacuum, I have inches checked and atmospheric checked, and then under boost, I have psi and atmospheric
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

Those are not on the options menu in the software.
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 12:30 pm Those are not on the options menu in the software.
Okay, I just loaded up smanager. Under options: "Tables follow VTEC" and "Show boost tables (0-1.8 bar)" are checked.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

And when you go to Options, Settings, what is checked on the unit tab?
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 1:04 pm And when you go to Options, Settings, what is checked on the unit tab?
Attachments
Screenshot (1).png
Screenshot (1).png (632.03 KiB) Viewed 553 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

It looks like it is displaying correctly in the background.
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 1:13 pm It looks like it is displaying correctly in the background.
It's displaying as Inches (")
Attachments
Screenshot (2).png
Screenshot (2).png (806.55 KiB) Viewed 550 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

looks normal
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 1:18 pmlooks normal
I may just be confused then lol. So col 9 is -0.8 inches of vacuum. Would col 10 be 0.4 psi since its positive?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Ignition timing table not showing psi

Post by Spunkster »

that's correct.
aconforti
Posts: 7
Joined: Sun Sep 25, 2022 3:01 pm

Re: Ignition timing table not showing psi

Post by aconforti »

Spunkster wrote: Mon Sep 26, 2022 1:28 pm that's correct.
This all makes so much more sense now. Sorry i'm new to all of this, and thank you for the help!
Post Reply