2014 Civic Si Tune with Skunk2 CAI

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
metamerio_mark
Posts: 2
Joined: Sat Oct 22, 2022 11:12 pm

2014 Civic Si Tune with Skunk2 CAI

Post by metamerio_mark »

I recently installed a Skunk2 CAI and had been running a MAF tune for a while with it with no major issues. But I would like to change to a speed density tune due to the increase in diameter of the intake. I found a speed density tune that was already made by a user on here and I uploaded it, and my car seemed to like it. But I would like some help dialing it in. Would anyone like to help me out?
Attachments
datalog0003 In-Town Cruise.fpdl
(996.31 KiB) Downloaded 126 times
datalog0002 Highway Cruise.fpdl
I turned around and got back on the freeway at 3:00 and did a WOT pull again
(1.1 MiB) Downloaded 121 times
datalog0001 WOT 3rd Gear Pull.fpdl
has a WOT 3rd gear pull at around 1:50
(679.82 KiB) Downloaded 120 times
Mark_FG41.00.fpcal
(22.99 KiB) Downloaded 125 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 2014 Civic Si Tune with Skunk2 CAI

Post by CalibratEd »

Mark,

The car seems to be running lean at part throttle and at WOT. I would refrain from driving the car hard. I always recommend to start with a base file than a random files posted online. Do you need something to drive the car around safely or a Full Etune? What are your plans for the car?

-Ed
metamerio_mark
Posts: 2
Joined: Sat Oct 22, 2022 11:12 pm

Re: 2014 Civic Si Tune with Skunk2 CAI

Post by metamerio_mark »

I’m planning on just doing a full etune so that my car makes good power and good fuel economy and what ot.
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 2014 Civic Si Tune with Skunk2 CAI

Post by CalibratEd »

metamerio_mark wrote: Mon Dec 12, 2022 1:10 pm I’m planning on just doing a full etune so that my car makes good power and good fuel economy and what ot.
Pm'd you with details.

-Ed
Post Reply