K pro not working
K pro not working
My k pro is stuck in limp mode. I tried in another car and also ran the same so I know it’s the k pro. I think I may shorted the ecu but I’m not sure board looks good to my eye. Is this fixable? Or do I have to get a new one? Please help
Re: K pro not working
What is the serial number that is on the K-Pro board inside the ECU?
From Help, About, what is the version of software you are using?
What errors are there when you datalog?
From Help, About, what is the version of software you are using?
What errors are there when you datalog?
Re: K pro not working
37820-PND-A07
2062-805298 of 06
And I get no errors because the ecu freezes setting on manager
Tried erasing ecu didn’t work
Ecu would start communicating to laptop with no key in ignition. K manager I assume was on last eat software because my mechanical reinstalled it. Not to sure what version.
2062-805298 of 06
And I get no errors because the ecu freezes setting on manager
Tried erasing ecu didn’t work
Ecu would start communicating to laptop with no key in ignition. K manager I assume was on last eat software because my mechanical reinstalled it. Not to sure what version.
Re: K pro not working
What is the serial number that is on the K-Pro board inside the ECU?
From Help, About, what is the version of software you are using?
From Help, About, what is the version of software you are using?
Re: K pro not working
Did I not give the right number? Where do I find that?
Re: K pro not working
You still have not given the K-Pro serial number.
Re: K pro not working
2062-805298
Is it not that?
Is it not that?
Re: K pro not working
No that is not the serial number that is on the K-Pro board inside the ECU. That is the ECU part number.
Re: K pro not working
I see T1Y-D3
Is it that?
Is it that?
Re: K pro not working
What vehicle is this being used on?
Re: K pro not working
What have you done that makes you think you may have shorted the ECU?
Re: K pro not working
I was testing voltage to the speed sensor seeing if anything went out because it was raining bad and I got a cel for speed sensor malfunctioning