TPS calibration issues

s300 and SManager software questions & answers
Post Reply
Ichiro718
Posts: 73
Joined: Sun Oct 23, 2022 9:16 am

TPS calibration issues

Post by Ichiro718 »

Hello again, I calibrated my TPS and I'm getting 4% closed, and 105% open. I did mess around with my TB cable and bracket. Should i try getting it close to 0% as I can?
Attachments
IMG_20221118_003626.jpg
IMG_20221118_003626.jpg (2.74 MiB) Viewed 610 times
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: TPS calibration issues

Post by Spunkster »

if it reads 0 and 100 datalogging then it should be ok.

I try to get the calibration as lose to 0 and 100 as possible without any correction though.
Ichiro718
Posts: 73
Joined: Sun Oct 23, 2022 9:16 am

Re: TPS calibration issues

Post by Ichiro718 »

In data logging, 4% is with throttle closed and WOT is 104%. I had to do some custom fabrication a whole back and it involved the cable. The reason why I'm pointing to the cable needing adjusting is because it's off by 5%. I'm going to slack up the cable a tiny bit and see if it gets me closer. I'm trying to shoot for like 1%-98-99%.
Post Reply