Ecu in recovery mode won’t reflash

[Notlowgio1]

So I got my hondata for the first time and very normally I was excited to reflash my car with the base hondata reflash. Mid reflash mis stopped for the first time I due to my battery that was basically dead and being held on by a maintainer at around 11.6v or so, long story short my ECU has been in recovery mode for like 3 weeks now I’ve tried throwing a different battery( not new) and using a jump
Pack with and a maintainer and once me and my buddy got it to load to about 98% and then it dropped. My Ecu is litteraly blank I’m pretty sure because I can’t unmarry hondata it says it doesn’t read the vin but it appears in the history. I know my Ecu still
Works bc I can use obd2 and a check engine light still appears in accessory mode so I don’t know what to do, I will continue to try and see what happened but I need help!!!!


It says to check my obd2 pins every time it stops but I’m not moving and my Obd2 plug works I use. My scanner no issue

I have the hondata Mini

[Spunkster]

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

[Notlowgio1]

Will do

[Notlowgio1]

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

just did it please help me out

[Hondata]

What is the serial number? People send us the feedback all the time so we need something to be able to match it up.

[Spunkster]

check your email for the response.

[Notlowgio1]

What is the serial number? People send us the feedback all the time so we need something to be able to match it up.

FP-2012Si-320316 is my serial number I sent a response to yours and more feedback got a new battery tried what was told same issue I need help

[Spunkster]

replied via email