Component Q31

ROM Editor 4 tuning software questions and answers.
Locked
tsrperformance
Posts: 14
Joined: Tue Jul 29, 2008 5:34 pm

Component Q31

Post by tsrperformance »

On Nitrous/Aux 2, to use A20 (PCS) output to activate a nitrous relay, what needs to be done to Q31? It is a US P75 ECU. Tried it without changing anything on the board but it will not activate the relay.
Thanks in advance
User avatar
Spunkster
Site Admin
Posts: 22743
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Nothing should have to be done to the ecu for this to work.

This has been tested and is working in the software as it is supposed to. Without a calibration and datalog showing the problem it is impossible to determine what the problem may be.
Locked