Technical Information OBDI Vehicle Reference
This is a guide to stock Honda ECUs by vehicle, with a listing of suitable ECUs for that vehicle. If your vehicle has an engine swap then it is recommended you view applications by engine. Many vehicles require an OBDII to OBDI adapter harness (note 6) and/or ECU swap (note 7).
Once you have identified what ECUs are suitable for your engine, go to applications by ECU to see what applications Hondata has for your engine.
Also see K-Series vehicle reference.
1989-2002
Model | Year | Country | Engine | Stock ECU | Suitable OBD1 ECUs | Hondata Systems | Notes |
CRX SiR | 89-91 | JDM | B16A | PW0J | P28,P30,P72,P61,P08J,P30J,P72J (OBD1 conversion required) | s300 | 2,5,9,10 |
CRX/Del Sol VTEC | 93-95 | US | B16A | P30 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Civic SiR | 89-91 | JDM | B16A | PW0J | P72,P28,P30,P61,P08J,P30J,P72J (OBD1 conversion required) | s300 | 5 |
Civic SiRII | 92-95 | JDM | B16A | P30J | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Civic/Del Sol DX/S | 92-93 | US | D15B | P06 | P06,P74,P75,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Civic DX | 92-95 | JDM | D15Z | P08J | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Civic Si/EX/ | 92-95 | US | D16Z | P28 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Civic HX | 96-99 | US | D15B | P2N | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3,6,7 |
Civic Si | 99-00 | US | B16A | P2T | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,6,7 |
Civic | 96-99 | US | D16Y | P2P | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,6,7 |
Civic | 96-99 | US | D16_ | P2E | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,6,7 |
Civic | 99-00 | US | D16_ | P2E | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,6,7 |
Integra XSi | 89-91 | JDM | B16A | PR3J | P72,P28,P30,P61,P08J,P30J,P72J (OBD1 conversion required) | s300 | 5,9 |
Integra LS/GS | 92-93 | US | B18A | PR4 | P74,P75,P06.PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3 |
Integra LS/GS | 94 | US | B18B | P74 | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3 |
Integra LS/GS | 95 | US | B18B | P75 | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3 |
Integra LS/GS | 96-01 | US | B18B | PR4 | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3,6,7 |
Integra GSR | 92-93 | US | B17A | P61 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2 |
Integra GSR | 94-95 | US | B18C | P72 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4 |
Integra GSR | 96-01 | US | B18C | P72 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4,6,7 |
Integra VTiR | 92-95 | JDM | B18C | P72J | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4 |
Integra Type R | 97-01 | US | B18C5 | P73 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,6,7 |
Accord LX/ EX | 90-01 | US | F22 | PT3 | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,11 |
Prelude Si | 92-95 | US | H23A | P14 | P74,P75,P06,PR4,P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,3 |
Prelude VTEC | 92-95 | US | H22A | P13 | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4 |
Prelude | 96-01 | US | H22A | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4,6,7,17 | |
Prelude SH | 96-01 | US | H22A | P5P | P72,P28,P30,P61,P08J,P30J,P72J | s300 | 2,4,6,7,8,17 |
Notes:
- Hondata s100/s200 and Stage 2/3/4 systems are both available for these OBDI ECUs but it is recommended to use the s100 or s200 systems.
- Manual transmissions only.
- P28,P30,P72,P61 ECUs configured to run non-VTEC.
- Secondary intake runner operation will be lost if a P72 ECU is not used.
- To use a Hondata system it is required that an OBDI ECU is used. Note an OBD1 distributor must be used.
- OBDII to OBDI adapter harness required.
- OBDI ECU swap.
- Differential control will be lost.
- Conversion from OBD1 required (OBD0-OBD1 adapter harness, OBD1 distributor).
- 4 wire oxygen sensor must be wired in and used if you wish to run in closed loop.
- 94 and 95 Accords have EGR (A11) and the O2 heating (A6) reversed and must be rewired
- If this ECU is used with a 6 speed transmission, reverse lockout will not work.
- PND A5# can be used only with Automatic transmissions and only reflash programs are available for this ECU.
- Use of this ECU is only recommended for motor swaps, as we do not offer any programs for the CRV.
- This ECU does not use a wideband oxygen sensor and is not compatible with US or JDM vehicles.
- Only Manual ECU's can be used with the K-Pro
- Conversion to an OBD1 distributor and some wiring may be required
- PRB-A13 ECU's are not reflash or K-Pro compatible (2005 RSX).