Hondata

Do you have a KPro plugged in? If not, then you don't need the driver. If so, give more information. Hi, I have an interesting issue. While I'm connected to kpro and dataloging and engine is working on idle, mechanic tried to test tps socket (because of tps not reading) with test light probe pen an...

Spunkster wrote: ↑Tue Sep 01, 2020 9:06 am That ECU will not have any reverse lockout functionality.

So no way like nitrous output etc ?

Spunkster wrote: ↑Mon Aug 31, 2020 9:46 am Post a picture of the inside of the ECU?

I attached some detailed pictures with kpro and without kpro.

I don't believe that a PNF-E01 is compatible with K-Pro. Hello, ecu is PNF-01 from United Kingdom with kpro4 and works. Today I tried to use nitrous output for reverse lock and it did not lock reverse solenoid. So I want to confirm the wirings. On the relay I wired: pin e21 to relay 85 relay 86 to ...

I don't believe that a PNF-E01 is compatible with K-Pro. Hello, I checked right now and also inside board is PNF-E01 (I did nor open the up cover completely because of there is warranty seal but I just look between cover and writing on the socket section is also PNF-E01). Ecu is come from United Ki...

Spunkster wrote: ↑Fri Jun 26, 2020 9:13 am What is the code on the side of the ECU?

Hello, I'm sorry its 37820-PNF-E01 not pnd ecu. Can I use the speed lock with this ecu?

Spunkster wrote: ↑Mon Sep 17, 2018 11:03 am You just need to move the wire. No relay is needed.

Hello, I just move b7 to b22 on prb calibration with pnd ecu but reverse lockout did not work. Car is jdm dc5 type r, may be I make something incomplete. Am I need to just relocate the wire and thats it?

Thanks.

Hello, I think there is an issue with entering Vault. I can enter Vault in kpro and flashpro but not in smanager. I changed my password and tried again but its same.

Hondata wrote: ↑Mon Jun 03, 2013 3:54 pm Sorry, no, Honda has limited it to 20.8% duty.

Can I ask what is the ms of k20 coils at 8000 rpm with 14volts? I couldn't calculate it sorry about that.

Thanks.

This is not an ECU we are familiar with and that knock board looks different than any we have seen as well. It does look like an s300j would fit, but not knowing what other circuitry changes have been made, it is impossible to know if there will be any issues. Hi, your website write jdm 37820-p30-O...

Hello,

Vehicle: 97 jdm honda civic
Engine: d15b non vtec
Oem ecu code: 37820-p2c-j63
Engine harness I don’t even know obd version just two sockets. It looks different than obd0.

Is there a conversion harness to use obd1 p75 ecu hondata s300?

Problem fixed. Thank you for support.

Hondata wrote: ↑Tue Feb 13, 2018 11:24 am Can you test this version and let us know if it fixes the problem?

https://www.hondata.com/updates/KManagerV4-3-5.exe

I don’t want to keep asking too much time sorry about that but my customers keep asking to me and now 6 customer waiting kmanager update for rev limiter. Can you tell when you release an update for fixing ? Yes, it was from the change for the datalogging of the rev limiter. Let us test this out and ...

Yes, it was from the change for the datalogging of the rev limiter. Let us test this out and see how much difference there is. Can I install back v.4.3.3 since they are using the same firmware I thought that it may work when downgrade the kmanager version. And also I couldn't find v4.3.3 on forum c...

Hondata wrote: ↑Mon Jan 01, 2018 5:24 pm The overall rev limiter or the launch limiter? What version did you upgrade from?

Overall rev limiter changed. I use 4.3.3 before this change.

Is there any update about it ? Or can it be because of you add
“Added rev limiter sensor to datalogging.” feature new version of kmanager?