Search found 138 matches

by Knox
Tue Mar 21, 2023 10:09 pm
Forum: FlashPro Manager
Topic: Ignition gear compensation
Replies: 7
Views: 7152

Re: Ignition gear compensation

This does not mean that it will go from 27 dgrees to -6. It means that if conditions are met it will retard up do 6 degrees from the table value. There are no nitrous controls to properly tune nitrous using the FlashPro. So it retards if engine knocks ? Can you please inform me about the conditions...
by Knox
Mon Mar 20, 2023 9:55 am
Forum: FlashPro Manager
Topic: Ignition gear compensation
Replies: 7
Views: 7152

Re: Ignition gear compensation

So it retards if engine knocks ?
Can you please inform me about the conditions? May be I can find a way to use it.
Or can you make it retard depending only to gear on ignition gear compensation ? I mean when you make new version of flashpro manager.
by Knox
Mon Mar 20, 2023 5:53 am
Forum: FlashPro Manager
Topic: Ignition gear compensation
Replies: 7
Views: 7152

Re: Ignition gear compensation

Hello, thank you for support. I attached calibration and datalog. On 3000 rpm you will see the ignition map is between 40 and 37, so the ignition is 38 degrees. But it should be -6 when I at gear 3-4-5.
by Knox
Thu Mar 16, 2023 2:30 am
Forum: FlashPro Manager
Topic: Ignition gear compensation
Replies: 7
Views: 7152

Ignition gear compensation

Hello, I tuned a JDM FD2 type r with nitrous couple years ago and I'm using "ignition gear compensation" and retard the timing at 3-4-5th gears. Yesterday we go to dyno because of exhaust system, intake system change and I notice the "ignition gear compensation" did not work and ...
by Knox
Mon Sep 12, 2022 12:02 pm
Forum: K-Pro Calibrations
Topic: Interesting injector issue
Replies: 5
Views: 6106

Re: Interesting injector issue

Spunkster wrote: Mon Sep 12, 2022 11:58 am I have checked this on the bench and using 1186, there is still an injector pulse, but it is greatly reduced due to the larger size.
What can you advise to me? Because in couple days customer will bring the car to me for try to solve the issue.
Thank you.
by Knox
Thu Sep 08, 2022 9:21 pm
Forum: K-Pro Calibrations
Topic: Interesting injector issue
Replies: 5
Views: 6106

Re: Interesting injector issue

Yes, immoblizer is disabled, car is k24 swapped civic ek. When I worte 1186cc and check injectors sockets there is no light at cranking, when I change to 310cc and check injector sockets at cranking I see light turn on and off.
by Knox
Thu Sep 08, 2022 1:09 pm
Forum: K-Pro Calibrations
Topic: Interesting injector issue
Replies: 5
Views: 6106

Interesting injector issue

Hello, I want to ask a question about interesting issue. Last night I tried to tune a stock k24 on civic eg and have this issue. Issue is when I calibrate fic 1200cc injectors on kpro with coorect cc and dead times, ecu do not send signal to injectors. When I write 310cc with 1200cc’s dead times or ...
by Knox
Wed Aug 17, 2022 1:17 pm
Forum: K-Pro / KManager
Topic: PRA ecu boost control
Replies: 3
Views: 3112

Re: PRA ecu boost control

No, I want to control nitrous solenoid. I saw on the software that software allow to use ac output as nitrous output so, I tought may be if I delete ac I can trigger the nitrous solenoid with pra ecu.
by Knox
Wed Aug 17, 2022 12:46 am
Forum: K-Pro / KManager
Topic: PRA ecu boost control
Replies: 3
Views: 3112

PRA ecu boost control

Hello, I have some research and found that PRA, PRC, PRD ecus can't control nitrous. (https://www.hondata.com/forum/viewtopic.php?t=5764) but on the software I sew that for output I can use AC output also, so I want to ask if I use AC output (so remove AC from the car), can I use nitrous wit PRA ecu...
by Knox
Sat May 08, 2021 3:01 pm
Forum: s300 / SManager
Topic: SManager 2.7.6
Replies: 11
Views: 6168

Re: SManager 2.7.6

Do not use older software once you have upgraded, as it will just cause more problems. Using the new version, with everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue. Hello, after I update to the n...
by Knox
Tue Sep 01, 2020 10:12 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 17
Views: 33439

Re: PND K-Pro Reverse Lockout HELP!

Spunkster wrote: Tue Sep 01, 2020 9:06 am That ECU will not have any reverse lockout functionality.
So no way like nitrous output etc ?
by Knox
Tue Sep 01, 2020 5:49 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 17
Views: 33439

Re: PND K-Pro Reverse Lockout HELP!

Spunkster wrote: Mon Aug 31, 2020 9:46 am Post a picture of the inside of the ECU?
I attached some detailed pictures with kpro and without kpro.
by Knox
Mon Aug 31, 2020 5:26 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 17
Views: 33439

Re: PND K-Pro Reverse Lockout HELP!

I don't believe that a PNF-E01 is compatible with K-Pro. Hello, ecu is PNF-01 from United Kingdom with kpro4 and works. Today I tried to use nitrous output for reverse lock and it did not lock reverse solenoid. So I want to confirm the wirings. On the relay I wired: pin e21 to relay 85 relay 86 to ...
by Knox
Tue Jun 30, 2020 11:54 pm
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 17
Views: 33439

Re: PND K-Pro Reverse Lockout HELP!

I don't believe that a PNF-E01 is compatible with K-Pro. Hello, I checked right now and also inside board is PNF-E01 (I did nor open the up cover completely because of there is warranty seal but I just look between cover and writing on the socket section is also PNF-E01). Ecu is come from United Ki...
by Knox
Sat Jun 27, 2020 12:25 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 17
Views: 33439

Re: PND K-Pro Reverse Lockout HELP!

Spunkster wrote: Fri Jun 26, 2020 9:13 am What is the code on the side of the ECU?
Hello, I'm sorry its 37820-PNF-E01 not pnd ecu. Can I use the speed lock with this ecu?