Search found 131 matches

by Lyle_57IAL
Tue May 23, 2017 1:23 pm
Forum: K-Series Reflash
Topic: RSX reflash - Is this tuneable via Flash Pro
Replies: 3
Views: 1859

Re: RSX reflash - Is this tuneable via Flash Pro

So what you are saying - the reflashed ecu that you can buy -cannot have any further adjustments done by the user with any type of software
by Lyle_57IAL
Sun May 21, 2017 11:03 pm
Forum: K-Series Reflash
Topic: RSX reflash - Is this tuneable via Flash Pro
Replies: 3
Views: 1859

RSX reflash - Is this tuneable via Flash Pro

Hey Hondata,

I am sure this is a very simple answer. The RSX type S Reflash - Is this just one stand-alone new map that hondata sell in a new boxed ECU ? or is this actually user tuneable via Hondata Flash Pro - or any other software package.

Lyle
by Lyle_57IAL
Mon May 08, 2017 3:39 pm
Forum: S300 Calibrations
Topic: Oem Na H22a - basemap timing at WOT
Replies: 2
Views: 802

Oem Na H22a - basemap timing at WOT

Hey hondata, Just finished a tune on a oem n/a h22a with IHE. Noticed the WOT timing figures were around 30 degrees - though this was a little on the high side and pulled it back to around 25 for piece of mind. Is this amount of timing really necessary - and are these values really what the engine r...
by Lyle_57IAL
Mon Mar 20, 2017 5:10 pm
Forum: s300 / SManager
Topic: P28 S300 - ECU voltage detection problem
Replies: 3
Views: 937

Re: P28 S300 - ECU voltage detection problem

Voltage going into the ECU is as expected. 13.5v or there abouts.
by Lyle_57IAL
Sat Mar 18, 2017 7:22 pm
Forum: s300 / SManager
Topic: P28 S300 - ECU voltage detection problem
Replies: 3
Views: 937

P28 S300 - ECU voltage detection problem

Hey Hondata, Currently have P28 S300 on a B18C Turbo Integra Dc2. Currently the ECU will not see the correct amount of voltage being produced from the battery. The floating battery voltage is around 13v as you would expected however the ECU sees this as 6.0v - and hense is messing with the injector ...
by Lyle_57IAL
Tue Jan 17, 2017 8:24 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 108763

Re: SManager software requests

Lyle_57IAL wrote:Hey Hondata,

In regards to the flex fuel - could I request a boost solenoid trim for the flex fuel sensor ? So you can setup more
Boost for when running e85


Hondata is this possible ?
Hondata is this a possibility ?
by Lyle_57IAL
Fri Dec 30, 2016 8:58 am
Forum: s300 / SManager
Topic: Engine Idle B18C2 - AC Compressor & Radiator Fans
Replies: 1
Views: 1028

Engine Idle B18C2 - AC Compressor & Radiator Fans

Hello Hondata, Currently having difficulty setting a smooth engine idle on a B18C2 GSR Turbo with AC still retained and full size radiator. When idleing - when the AC turns on the car will drop in rpm by approximately 200rpm and lean out from around 14.5 to 16.5. Obviously from the extra load on the...
by Lyle_57IAL
Fri Dec 30, 2016 8:55 am
Forum: S300 Calibrations
Topic: B18C GSR Turbo - Base map Review
Replies: 1
Views: 2007

B18C GSR Turbo - Base map Review

Hey Hondata, Would you mind reviewing this base map for engine Run in? Currently 6 psi boost cut, vtec disabled, low speed maps only tuned. Would you mind specifically checking the low speed ignition timing tables to see if these are reasonable for a run in tune. There was no detonation on the tune ...
by Lyle_57IAL
Thu Dec 29, 2016 10:49 pm
Forum: s300 / SManager
Topic: B18c over heat protection
Replies: 1
Views: 773

B18c over heat protection

Hey hondata, Currently working on a B18c Honda integra turbo that has both a front mounted intercooler, and aircon condenser core in front of the oem full size radiator. Because of this the temps get a little warmer then usual when hitting low road speeds. What is a recommended over temperature prot...
by Lyle_57IAL
Tue Sep 27, 2016 4:34 am
Forum: FlashPro Manager
Topic: Flash Pro Boost Control - PWM
Replies: 3
Views: 1032

Re: Flash Pro Boost Control - PWM

My specific use is a accord euro.

However are you saying that based on different base maps created for different cars capable of supporting flash pro - different features will be available?

Cheers
by Lyle_57IAL
Mon Sep 26, 2016 2:18 am
Forum: s300 / SManager
Topic: Vtec Spool CEL - B18c P28
Replies: 7
Views: 1686

Re: Vtec Spool CEL - B18c P28

If it is giving strange errors and behavior, something is not right. If it were me I would not use that ECU and use one that worked correctly to avoid any future problems. Spunkster - This is not a quality response that of what i would expect from a vendor / manufacture. What is the condition that ...
by Lyle_57IAL
Sun Sep 25, 2016 6:26 am
Forum: FlashPro Manager
Topic: Flash Pro Boost Control - PWM
Replies: 3
Views: 1032

Flash Pro Boost Control - PWM

Hey Hondata, I am still trying to understand if the Flash pro is Boost control capable? In the help contents it seems to be referenced ? but i cannot find the solenoid duty cycle / quick spool / high low settings in my flash pro manager? Or do these only become available on only specific make/model ...
by Lyle_57IAL
Fri Sep 23, 2016 8:13 pm
Forum: s300 / SManager
Topic: Vtec Spool CEL - B18c P28
Replies: 7
Views: 1686

Re: Vtec Spool CEL - B18c P28

Why Does hondata give the option available to disable the error in the Vtec Tab ?
by Lyle_57IAL
Fri Sep 23, 2016 7:23 am
Forum: FlashPro Manager
Topic: Flash Pro - Flex Fuel Input
Replies: 1
Views: 1261

Flash Pro - Flex Fuel Input

Hey Guys,

Currently looking at a 2004 honda Accord K24 using flash pro. These ECUs do they natively support the frequency Flex fuel input from the standard 3 wire GM sensor ? if not is it an option to use a 0 - 5v signal from a ethanol gauge (Innovate etc)

Thanks hondata :)

Lyle
by Lyle_57IAL
Fri Sep 23, 2016 12:41 am
Forum: s300 / SManager
Topic: Vtec Spool CEL - B18c P28
Replies: 7
Views: 1686

Re: Vtec Spool CEL - B18c P28

Spunkster - i would like to know if this will potentially cause any harm to OR allow a harmful condition to occur by disabling the vtec spool CEL

Cheers